Medium Camber – Camber profiles are defined from low to high. Higher camber make for more dynamic boards that need to be ridden more aggressively to get maximum performance. Lower camber boards are smoother on lower speeds and in powder. All camber profiles run from nose to tail. higher is not always better...

3BT™ (Triple Base Technology) with SideKick™ – All Bataleon boards feature tip to tail positive camber in combination with lifted sidebase contact points. SideKick™ Tips enhance 3BT’s advantages like nothing you experienced before by dramatically increasing the sidebase uplift at the widest points of the nose and tail. This makes turn initiation even smoother, increases float in powder and handling of the board in rough terrain.

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Twin – Boards that need to excel both on the slopes and out of bounds are shaped with evenly proportioned center and side bases and a medium uplift striking the optimal balance for freestyle and freeriding.

Low Nose Sidebase Uplift – The gradual side base uplift in the nose determines how the board will behave on snow. most effected are the edge to edge performance and the uplift generated when riding powder.

Low Tail Sidebase Uplift – The gradual side base uplift in the tail determines how the board will behave on snow. Any amount of uplift brings all the benefits of Triple Base Technology making Bataleon boards more versatile then others.

Ultra Light Core – A 70/30 Swiss paulownia and poplar blend that offers awesome strength to weight.

Tri-Ax Laminate – The three-way fibreglass weave is light, strong and crazy responsive. This is used to beef up the flex pattern on more aggressive boards.

Carbon Stringers – Carbon is feather light and adds explosive pop, precise edge control, reactive response and smooth dampening to a board. Bataleon uses this to beef up the flex pattern.

Dual Radial Super Tubes – Six hollow carbon tubes run parallel to the edges of the board to give it better response.

Shock Walls – Urethane infused sidewall technology. ShockWalls smooth out your ride and are more resistant to impact.

Hyper Glide S – Bataleon's standard sintered base that’s durable and fast – and even faster when you keep it waxed.

Float Ratio – 62 (10 min float - 100 max float)

2 x 4 Insert Pattern

Flex Rating – 7 (1 Soft - 10 Stiff)

3D Flex – The smallest possible binding footprint, with the least amount of hard plastic touching the board, allows your snowboard to ride the way it was engineered. Bataleon bindings allow the snowboard to perform all its dynamic characteristics without being restricted or distorted. Ride your board, not your binding!

AsymWrap™ Chassis – The choice of riders that are looking for some side-to-side tweak and a bit of a surfy feel. The 3 connection points will offer a slightly more mellow side-to-side flex without sacrificing edge-to-edge control.

ToadGrip Heel Rubber – A grippy rubber traction pad protects the back of your boot and keeps it locked in at all times.

Adjustable Base Size – The heel cup can be adjusted to help you center your boot perfectly in the binding and on your board.

Dual Density Footpad – Combines a super durable rubber top layer with an EVA foam core for supreme dampening and support.

Adjustable Padding – Choose from three different FootPad positions for a perfect fit with the sole of your boot.

2° Canted Padding – A two degree angle in the footpad helps mellow out the knees a bit in wider stances.

FullBack Highback – These nylon composite injected highbacks are lightweight and supportive with a mid-stiff flex for precise edge control.

Adjustable Forward Lean – Fast, tool-free adjustment via the cam lever on the rear of the highback. Dial up the lean for a more aggressive heelside response or use less lean to keep it chill.

Rotatable Highback – Angle your highback parallel to the heelside edge for the most efficient power transfer.

Infinity Anklestrap – Next level comfort. Form-fitting pre-curved geometry distributes pressure toward the edges of the strap to eliminate pressure points.

Kink Ladder™ – Kink Ladders allow you to change the feel of your binding by choosing a low or a high connection point for your ankle strap.

Infinity Toestrap – The Infinity Toestrap features 3D Auxetic Shape Technology — a hinged pattern that expands perfectly around your boot without stretching or distorting the material for unmatched grip and comfort.

TwoStep Toeladder – Select from two positions on each side of the binding to customize the fit for any boot shape and size.

Bulletproof Buckles – Super solid ratchets made from forged Aluminum that will never let you down. Featuring a triple-tooth action for super fast strap closure.

Never Miss a Day Parts Kit Included – Binding problems should never be a reason to miss a day of riding. That's why Bataleon has designed and tested these bindings to withstand the worst punishments. But stuff still happens especially when you ride hard. So just in case something does wear out, Bataleon includes the Never Miss a Day parts kit with every underwrap binding. This emergency kit contains extra ladders and a couple of disk screws and washers so you will never miss a day of riding!