But fear not - there is plenty to explore...
Shop all Arbor Shop sale ArborMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
On edge. The Arbor A-Frame Camber Snowboard is restless, motivated, and devastatingly fast. This board is a corduroy roasting, big line toasting, all-mountain hold-on-for-dear-lifer. A snow dragster, the A-Frame has large radius sidecut for max stability at speed: this isn't a board for dinking around on marginal conditions. One tip for A-Frame tamers: keep your yes from drying out with extra pair of gigantic goggles to go over your normal goggles, because you're going to be approaching ludicrous speeds pretty much everywhere.
System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.
Flex Rating – 8 (1 Soft - 10 Stiff)
Taper – 8.7 mm
Highland II Core – A newly developed screening process has allowed Arbor to hand select the very lightest and highest quality paulownia from sourcing partners. The result is a lighter, more responsive version of the Highland Core, known for highly reliable return and long-lasting durability.
Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.
RWD Carbon A-Frame – Diagonal carbon fiber inserts running diagonally from underneath your back foot to the outside contact point increase snap and rebound under your dominant back foot for powerful drive and power transfer.
360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
Zero Waste Base – All of Arbor's die-cut bases feature Zero Waste Base technology. This process is essential to reducing the carbon footprint and eliminating waste during the manufacturing process.
Sintered Plus Base – Arbor's sintered plus base is mid-density material that demonstrates increased speed and durability while maintaining the ease of repair.
Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.
Red Gum / Palisander / Black Dyed Ash Powerply
Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.
Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.
Sustainable Wood Materials
Leaving It Better
2x4 Fourteen Pack Inserts
Size (cm) | 158 | 159W | 162 | 165Mw | 170W |
---|---|---|---|---|---|
Effective Edge (mm) | 1160 | 1170 | 1196 | 1222 | 1268 |
Tip Width (mm) | 296.2 | 310 | 299.7 | 310.8 | 320.3 |
Waist Width (mm) | 254 | 266.5 | 256 | 266 | 273.5 |
Tail Width (mm) | 287.6 | 301 | 291 | 302.1 | 311.4 |
Sidecut Radius (m) | 9.1 / 8.2 / 9.1 | 9.0 / 8.1 / 9.0 | 9.3 / 8.4 / 9.3 | 9.45 / 8.55 / 9.45 | 9.7 / 8.8 / 9.7 |
Stance Setback (mm) | 10 | 10 | 10 | 10 | 10 |
Rider Weight (lbs) | 126 - 206 | 130 - 210 | 134 - 214 | 140 - 220 | 134 - 214+ |
Width | Regular | Regular | Regular | Mid-Wide | Wide |
Redesigned and ready to rip, the freestyle-focused Arbor Hemlock Snowboard Bindings are better than ever. Their re-engineered symmetrical highback has 5 degrees of lateral pre-rotation for freedom of movement, and Arbor's System X baseplate connects you directly to your board for increased response while you're hitting tricks. Whether you're cruising for side hits or lapping your favorite rails, the Arbor Hemlock Snowboard Bindings are sure to be a park fave.
System X – The System X design evenly distributes a rider's energy into their snowboard. No matter where pressure is applied to the binding, the System X allocates energy across the baseplate's structural X shape, and out to the four cardinal points. The result is quicker, more effective control. 15% glass content for added strength and stability.
50A Durometer Outsole – The Outsole is a dampening interface made from a special TPE rubber. The Outsole integrates with the System X design and sits between the binding and a rider's snowboard. The Outsole diffuses high-frequency chatter while providing rebound and cushion for high-impact landings. On the Cypress, Arbor uses a slightly stiffer durometer TPE for added performance.
Adjustable Extruded Aluminum Heelcup – Highly durable extruded aluminum, designed to work with the Mini-Disk for amazing adjustability. Use the highback to center the foot and the disk to fine-tune your stance width.
Fiberglass Reinforcing – The Hemlock and Sequoia, feature a 15% glass content for a softer, more forgiving ride; while the Cypress have 30% glass content for added strength and stability
EVA Footbed
Tool-less Forward Lean Adjustment
Hemlock 2 Asymmetrical Highbacks with 5° Lateral Pre-Rotation
Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.
Co-Molded Ankle Strap
Fiberglass Reinforced Nylon Buckles and Levers
Cast Aluminum Buckles and Levers – Offering ultra-reliable performance with long-term durability and a tighter, stronger click for an unparalleled boot-to-binding connection.
2x4 Universal Mini-Disc – Mini-Disks require less surface area and along with the System X help provide a more organic snowboard flex underfoot. They are channel compatible.