Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 7 (1 Soft - 5 Stiff)

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

C/FX Basalt – A patented combination of fiberglass and basalt designed to provide an optimal ratio of weight, power, and dampening.

BA MD Fiberglass

30% Bio-Based Resin

ABC Wrapper – More dampening, less plastic ! ABC Wrapper is a process using wood veneers to reduce fiberglass in each board.

Recycled ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

2 x 4 Insert Pattern

Feel Rating – 6 (1 Soft - 10 Stiff)

A-Series Aluminum Chassis – The A-Series Chassis provides the reactive flex and power transfer of aluminum underfoot. The A-Series Chassis was designed to allow the aluminum to flex under the rider’s weight allowing for a much more reactive ride.

A-Series Diecut Basepad

Canted Footbed

Plastic Discs

Slimeback™ Highback – These Highbacks utilize urethane similar to Ride's Slimewalls™ technology. The Slimeback™ material absorbs shock and damps vibrations to help smooth the ride while providing fluid support.

Two-Piece Ankle Strap

Minimalist Toe Strap

Linkage Ratchet – Designed to improve ladder durability and eliminate ratchet wag, resulting in a smoother user experience with the same hold you expect.