Backseat Camber – Camber loaded under the back foot for precision and control, with flat segments under the front foot for superior floatation in deep snow. The best of both worlds!

Flex Rating – 7 (1 Soft - 5 Stiff)

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

C/FX Basalt – A patented combination of fiberglass and basalt designed to provide an optimal ratio of weight, power, and dampening.

Recycled ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

50% Recycled Sintered Base – 50% recycled base materials! Reducing waste without sacrificing glide!

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

2 x 4 Insert Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

AM1 Highback – K2’s new AM1 Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.