True Camber – Pop, power, and stability - it's full camber, baby.

Flex Rating – 2/5 | Friendly and Playful

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Medium 3D Contour Base – Freeride-focused 3D Contour Base featuring a spoon bevel in the nose and in the tail. Spoon bevel starts at the rocker point.

True Twin

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Dual Radius Flip Tips

Master Core – The Master Core is made of 1:1 Poplar to Paulownia ratio in alternating stringers to create a lightweight, poppy, and durable core.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

BComp Carbon / Flax Stringers – BComp Carbon/Flax stringers offer the perfect performance balance as the carbon provides crazy pop and the flax sucks up chatter and reduces CO2 emissions compared to a full carbon stringer. Developed in collaboration with the Swiss engineering firm BComp.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Medium Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Premium Topsheet – Premium Topsheet is durable and perfect for daily use.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Personality / Flex: Stiff & Lively – 4/5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Carbon Injected Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit.

Flushcup Technology

3˚ Canted Foot Pillow

Control Flex Highback – Designed for balanced response and flex. Mid-wide profile and mid-stiff flex let you lock in turns or tweak airs.

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Hinge Connector Strap Attachment + Pre-Curved Ladders

Tool-Less Strap Adjustment

Zytech Buckles

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel