Directional Flat Top™ – Flat overall with a rocker nose for the steady stability and effortless float demanded by deep days and surfy terrain.

Directional Flex – This flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control through all terrain and conditions.

Personality – 3-6 (1 Soft - 10 Stiff)

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Directional

30mm Taper – Taper promotes floating and turning with a shorter width on the tail that drops it down and a wider width at the nose that pops it up.

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

45° Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

Park: 2/10, All-Mountain: 4/10, Powder: 10/10

The Channel® – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

EST® Binding System – By removing the materials from beneath your feet and replacing them with cushioning, Burton is able to drastically reduce weight and explore entirely new designs. With EST®, the possibilities for flex is infinite, and so are the stance options.

30% Short-Glass / Nylon Composite Lower – Slightly more responsive than the 18% short‑glass/nylon composite, yet still plenty playful.

30% Short-Glass / Nylon Composite Spar – Slightly more responsive than the 18% short‑glass/nylon composite, yet still plenty playful.

The Hinge™ – Exclusive to EST® baseplates, this Burton-exclusive technology flexes dynamically with your leg for increased foot roll, less fatigue and easier ollies.

SensoryBED Cushioning System™ – Dual-density EVA automatically settles your boot into a natural position regardless of stance, width or angles for improved comfort, reduced fatigue, and more direct board control.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Supergrip Capstrap™ – The Supergrip Capstrap™ delivers optimal fit and function with an ultra-minimalist, glueless, stitchless, and PU-free injection molded strap component that works both as a capstrap™ or over the toe. Simple and super durable.

Flex Slider – Makes strapping-in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also incredibly strong.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Mounts Exclusively with Burton Boards Featuring The Channel™

Re-Ground Materials to Reduce Waste