CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 8 (1 Soft - 10 Stiff)

Directional Twin

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Torrent Core – Made with 20% Poplar and 80% Paulownia, this core is lighter than the standard 50/50 blend. Poplar adds reliable flex and stability, while Paulownia cuts weight without sacrificing strength. The result is a light, responsive, and durable snowboard built to handle a variety of riding styles and terrain.

Triax Glass Fiber Construction – Triax Glass Fiber Construction uses fiberglass woven in three directions to provide a perfect balance of torsional stiffness, durability, and energy transfer. This construction enhances edge hold and stability at speed while keeping the board responsive and lively underfoot.

Freestyle L Fiber Reinforcement – Stringers of carbon in a dynamic L-Shape from the insert pack to the tip. This design enhances nose stiffness, increases torsional response, and delivers exceptional stability.

Sintered Base – Crafted by fusing tiny polyethylene particles under heat and pressure, creating a porous, durable surface. Known for superior speed and wax absorption.

Slam Back Inserts

2 x 4 Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Hanger 3 – Hanger 3.0, incorporates a wider bushing footprint closer to the board's edges, enhancing board connection and accelerating energy transfer. It also features a dropped-down inner lateral wall for improved ankle mobility and accommodates larger volume boots.

Nylon Post – The Post, a unique component of #YES Bindings. The Post is the crucial connection between the binding and the board, where the disc sits and securely attaches the two. What sets the #YES Post apart is its minimal imprint on the board, preserving the board’s full flex integrity for optimal performance.Crafted from Nylon and injected with glass fiber, the Post is both stiff and lightweight, ensuring seamless connectivity and precise energy transfer.

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Conda Flat Footpillow

Performance Flex – The Performance Flex Highback from #YES Bindings, for the freerider who demands a highback that syncs flawlessly with their every boot. This highback is crafted to complement the natural shape of your boot. Constructed to maintain stiffness, the Performance Flex Highback provides the necessary support to transmit your movements directly to the snow, allowing you to ride with confidence and control. Ideal for riders who seek a highback that supports vigorous riding styles, the Performance Flex offers stability where it’s needed most, without compromising the freedom to explore the diverse mountain landscape.

Asym Perform – This new Asym FRS strap features a “power spine” which adds a layer of support and comfort and is perfect for navigating steep and uneven terrain or laying down some hearty power carves. This strap molds perfectly to any type of boot.

Stretch Fit Toe Strap – Sometimes what works best is a simple, streamlined, minimalist design, and for this - a 3D strap with Stretch-fit is offered.

Nylon with Glass Fiber Buckle Levers – Our Glass Fiber buckle levers, crafted from a blend of Nylon and glass fiber. Stiff and solid, these levers provide a quick and secure strap-in process.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Hard (55 shore) Bushings - Also has Medium (45 shore) in addition.

Flex Rating – 6 - 9 (1 Soft - 10 Stiff)

Instep Flex Zone - Boa Specific – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Exocap Molded Toe Protection – A molded plastic toe cap provides maximum protection and extra space in the toe box to keep your toes wiggling and warm.

V3 Range Edition Ultracush with TNF Flashdry Liner – UltraCush interior cushioning layer / The North Face FlashDry materialization / Expanded Comfort Flex neoprene forefoot / Updated X-Cage for superior heel hold /Dual-density, heat-moldable core / Closed-seam microsuede cuff and tongue

Vans + TNF FLASHDRY™ – Vans and trailblazing outdoor innovator The North Face™ continue their partnership on the first-to-market FlashDry-equipped snowboard boot liner. FlashDry fabric technology is engineered to act like a second skin, pushing moisture to the surface and eliminating it as fast as possible. These fabrics are engineered to repel and resist wetting out to help provide quick-drying performance that keep the user dry and comfortable. Setting a new industry standard in moisture management and allconditions comfort, this technology has now been integrated into all of the Vans V3 UltraCush™ TNF FlashDry liners.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 PopCush Footbed – Tri-density POPCUSH construction / OrthoLite® open-cell foam top layer / TPU arch support heel clip provides stability while allowing torsional flex / Advanced 3D-molded anatomical shape / Anti-fatigue coring design / Airflow perforations / Nylex moisture-wicking top sheet

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Adaptive Range Mode – Features a Rear Drop-Cuff that can be unlocked to widen the cuff opening for expanded range of motion while walking or skinning.

Waterproof Zipper Shroud and D Ring – This feature is a durable and weatherproof fabric shield that protects the lower part of your boot from snow, ice, and moisture, ensuring easy access to your Boa closure no matter what the weather throws at you. It also features a metal D-ring for securely fastening your pant gaiters to lock out snow.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.