Free-The-Ride Camber – Designed for all-mountain prowess and float in the deep. Rockered in the nose, flat under the front foot, with a positive cambered tail.

Flex Rating – 8 (1 Playful - 10 Precise)

7.5mm Taper – Built into directional boards built with wider noses than tails helping with agile turns and added float in deep snow.

Directional Diamond 3D – Diamond 3D is designed for edge-catch-free riding and crazy float in powder. The Directional Diamond 3D is found only in the board's nose to help float in deep powder and crank long, smooth turns. Built for premium pow performance, while still being reliable on groomers.

Directional Tri-Radial Sidecut – Traditional tapered directional shapes typically lack snap and response, especially off the tail - this design provides performance, power, and stability throughout the entire turn without any compromise.

Carbon Omega Hotrods – Thin rods of carbon surrounded by an Omega wrapper are milled into the board’s core starting just inside the insert packs and extending into the nose and / or tail.

Flax Impact Plates – Flax Impact Plates are woven flax mats that are housed around the board’s insert packs, sandwiched between the core and topsheet. This horizontal layup works to withstand deep landings, distribute impact in variable conditions and increase the board’s overall lifespan without dramatically changing the board’s flex.

Directional Flax Walls – Directional Flax Walls are used in the noses of all-mountain boards providing additional stability and power to handle steep terrain and the impact associated with all-mountain riding.

SinterSpeed Base – Rome's fastest sintered base, built for maximum speed and performance.

2 x 4 Inserts

Flex – 7 (1 Playful - 10 Precise)

Kink Ladders – Kink Ladders are designed to allow riders to choose from two different ankle strap positions on the boot; ride it up for a more powerful feel or drop it low for a looser ride.

FullWrap Platform – Our bombproof FullWrap Platform features a heelhoop with four connection points to the baseplate for maximum energy transfer and pure connected power. Built with more lateral support than the AsymWrap platform, FullWrap bindings are designed for advanced stability, durability and power.

Baseplate Materials – 30% Carbon / 70% Nylon

Footbed Canting – 2-Degree Dual Density

Forged Aluminum heelhoop for lightweight strength and durability

Highback Materials – 15% Glass / 85% Nylon

UltraFlex Pro Ankle Straps – Built with an open-edge 3D Auxetic pattern and molded onto a spine for unprecedented levels of locked-in hold and tweakability.

ProGrip Toe Straps – Rome's game-changing strap built with the legendary hold of AuxTech®, this one-piece design provides next-level locked-in hold and undefeated comfort.

AUXTECH – A Rome-first innovation, AuxTech® is a game-changing pattern used in ankle and toe straps. Auxetic patterns are geometric patterns that are essentially a network of tiny hinges that expand evenly when pressure is applied. Best-in-the-game surface area pressure distribution and connected comfort: that’s AuxTech®

BombProof Buckles – A one-piece forged aluminum construction for better grip and durability.

Flex Rating – 5 (1 Soft - 5 Stiff)

1:1 Lasting – This new new last is the keystone of the boot - the best fit in snowboarding today. Nidecker landed on an 8° forward lean - the sweet spot between comfort and performance. 1:1 Lasting means a specific liner, shell and footbed for each full and half size. Women’s, men’s and youth boots seperate lasts for full anatomical accuracy

3D Molded Tongue – The asymmetrical tongue is 3D molded and curved towards the medial side, following the naturally raised ridgeline of your forefoot to alleviate pressure points and give a more balanced feel of comfort and support. An anatomically correct and asymmetrical tongue performs better than a standard straight one.

Internal Heel Lock – Powered by the external side dial, the double lace goes through an internal harness attached to the shell and tongue. When you tighten it, it creates a three-dimensional ankle lock. Lateral tightening from the harness around the ankle ball, and frontally from laces which pass through the tongue, lowering it downards against your instep

Diamond Liner – Made from state-of-the-art memory foam, it delivers a secure, custom fit with more consistent forward flex.

Thinsulate™ – The benchmark in lightweight thermal insulation, developed by the experts at 3M.

Asym 3F – Part of the ASYM3F Technology : FIT - FEEL - FLEX are combined in an asymmetric shape and closure system that delivers optimum support and flex. Lined up along the asymmetrical molded tongue, the Boa® Fit System lace guides are also asymmetrically positioned on the flatter areas of your forefoot for less point-loaded pressure and a more even closure, which increases medial arch support to reduce foot fatigue and cramping. This Nidecker innovation is codeveloped with and approved by Boa®.

Dual BOA

H4 Coiler™ BOA Technology – Effortless and fast, the Coiler quickly takes up lace slack, increasing speed of entry into the boot. Ready for anything, designed to withstand

3D Triple Density – Premium 3D insole uses triple-density EVA to cradle your foot. Firm support at the heel cup and arch combines with a high-rebound heel layer, while a fleece-lined footbed with silicone print adds warmth and grip.

OC Kush – Shock-absorbing dynamic gel pads are inserted into the outsole around the heel area. This extra cushioning helps you soak up heavy landings and reduces fatigue from bumpy snow, as well as making your boots super comfy to walk around in.

Vibram® Approach Outsole – This top-of-the-range outsole comes with a full EVA midsole for the best possible comfort under the whole foot. An OC-Kush insert gives excellent dampening under the heel. The highlight is the new Vibram ICE-TREK compound, which is the best rubber available for cold, icey or snowy surfaces. Extra grip at toe and heel was inspired by fish scales.

Exo Spine – An external backstay that supports the whole boot and transfers energy instantly from heel to toe. It connects seamlessly to the outsole via our Transition Zone, so you won't hook up on the binding's heelcup when you enter or exit your binding.

Storm Cover – A water-resistant PU/mesh cover with zipper. The Storm Cover keeps feet dry for long days in deep snow conditions and features a 3D engineered knit to perfectly match the shape of the boot. Stretchable material at the top eases closure.

Space Blanket – A thermal insulation barrier between the outsole and the bottom of the liner keeps the warmth inside and the cold outside.

Custom Calf – Velcro wings at the back of the shell can be adjusted to accommodate bigger calves and gain extra stride length when splitboarding.