Directional Combination Camber Profile – The best of both worlds. By blending both traditional Camber and Rocker profiles, Combination Camber gives you all the benefits of both: the pop and precision of camber, and the float and predictability of rocker.

Flex Rating – 6 (1 Playful - 10 Precise)

Volume Shift™ – Volume is moved from the tips and tails of traditional snowboard shapes and placed underfoot where it can be better controlled. This makes a wider, shorter design that maintains the same float and stability of a traditional board, but increases mobility and maneuverability. Size down 3-5cm from your uaual snowboard length.

S1 Core – The smooth-flexing cousin to the A1 core, K2's new S1 core in designed to be damp underfoot and stronger than hell. Constructed from bamboo, aspen, and paulownia, the S1 core lets each wood do what it's best for. Tip-to-tail bamboo stringers add snap, durability, and dampening underfoot, and are balanced out by lightweight paulownia in the midbody, tip, and tail to help reduce swing weight. Underfoot, aspen and bamboo are placed at 30° angles to increase strength, supercharge edge-to-edge response, and increase pressure distribution along the edge.

Carbon Y-Beam – Adding snap and stability in the tail, and sending energy to the contact points in the nose - this means that you’ll get the stability and edge pressure that you want, without the unnecessary torsional rigidity.

Triaxial Glass – A glass laminate with diagonal layers that adds torsional stiffness for increased stability and improved edge hold. The fibers three layers of fibers are woven at 45° , 45° , and 0° . This makes for a more responsive ride longitudinally and torsionally.

3D Base Contour – 3D contour that is gradually blended from the running surface deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market, the Wax-Infused Sintered 4001 Base holds wax longer than other sintered bases for smoother, longer lasting glide.

2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

Team Highback – K2’s new Team Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.

Flex Rating – 8 (1 Soft - 10 Stiff)

Articulating Cuff Upper

BOA® Conda™ Liner Lacing – A patented K2 liner lacing system that uses a urethane harness to gently hug your ankle, creating unrivaled heel hold. BOA® Conda™ allows for adjusting liner tightness and heel hold on the fly from outside of the boot, even with gloves on.

Intuition® Pro Foam 3D Liner with SpaceHeater™ – A liner designed for comfort and warmth, from start to finish. It features reflective heat blanket panels that work to trap heat in and keep cold out. These reflective heat blankets work alongside heat moldable Intuition® foam, internal J-Bars, and 3D molded dual-density EVA insoles to keep your foot comfortable and warm all day long.

S’Café™ Coffee Mesh Liner – With functionality and sustainability in mind, K2 coffee mesh is made from recycled post-consumer coffee grounds that is combined with post consumer recycled polyester. This mesh enhances odor control and moisture management of our standard lining mesh and is made from 95% recycled material with no added chemicals.

H4 Boa® Coiler – A cable and reel based lacing system that creates even tension and easy lacing operation. This system features low friction guides for even tightening. Boa® works to automatically retract lace slack so your boots stay nice and neat.

Harshmellow™ Pro Footbed – Three separate compositions, Pro, Plus, and Base, now all incorporate K2’s proprietary Harshmellow™ damping into the layup of the footbed. The result is superior vibration absorbing and comfort for all-day excursions into the backcountry or hiking and riding around the resort.

Vibram® V5 Outsole – Vibram® V5 Outsole features a full EcoStep rubber (30% regrind) with and Harshmellow™ pods under the toe and heel to reduce noise underfoot. The V5 Outsole is the perfect combination of sustainability and performance.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.

Rubber Reinforced Toe Cap – Abrasion resistant reinforced outsole rubber is placed in areas of high stress to extend the life of the boot and increase durability.

Endo™ 2.0 Heel Counter – A K2 Snowboarding exclusive, Endo™ Construction allows the flex, response, and rebound of a snowboard boot to be altered without adding extra materials (extra materials = extra weight). By replacing additional materials with an injected heel-counter, adding extra rebound is as easy as a formula change and helps to provide a more consistent flexing, longer-lasting snowboard boot.

80% Recycled, FSC® Certified Carboard Packaging

99% Recycled Packaging Paper