CamRock – CamRock profile blends camber in between the bindings and rocker in the tip and tail. This profile enhances freestyle riding by being more playful while still having the pop, power, and response of camber.

Personality / Flex: 4 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Medium 3D Contour Base – Freeride-focused 3D Contour Base featuring a spoon bevel in the nose and in the tail. Spoon bevel starts at the rocker point.

Directional Twin

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Ultra Core – The Ultra Core is primarily made out of Paulownia with added pockets of Poplar to create this incredibly durable, poppy, and responsive core.

Koroyd™ – Koroyd™ is the lightest, most advanced damping core material Jones has ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Reclaimed Aerospace Carbon Stringer

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Recycled Sintered 9900 Base – High performance sintered base material made from 50% virgin material and 50% recycled factory scraps that offers unrivaled speed, durability and wax absorption. Made in Austria.

Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Recycled Edges – Bombproof edges made to be the strongest and longest-lasting on the market.

Ash Wood Veneer – Lightweight and super damp Ash wood veneer topsheet layer that eliminates edge chatter and delivers even flex and supreme torsional stiffness.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Freeride / Freestyle Pack Inserts – Allows option to center or set back your stance on the sidecut as conditions demand.

Personality / Flex: Stiff & Lively – 4/5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Carbon Injected Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit.

Flushcup Technology

3˚ Canted Foot Pillow

Control Flex Highback – Designed for balanced response and flex. Mid-wide profile and mid-stiff flex let you lock in turns or tweak airs.

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Hinge Connector Strap Attachment + Pre-Curved Ladders

Tool-Less Strap Adjustment

Zytech Buckles

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.