High Power Camber

Hybrid Full Camber Profile – For grip and stomping tricks.

Mid-Stiff Flex – For power and control.

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Howler 3D Shape & Profile

Directional Shape

Long Sidecut – For stability at speed.

3D Contour Base 2.0 – Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

3D Flip Tips – 3D Flip Tip maximizes float in deep powder, enhances glide and turn initiation, while reducing tip catch in rough terrain.

Low Tapered

Medium Traction Tech

Power Core – Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

BComp Carbon / Flax Stringers – BComp Carbon/Flax stringers offer the perfect performance balance as the carbon provides crazy pop and the flax sucks up chatter and reduces CO2 emissions compared to a full carbon stringer. Developed in collaboration with the Swiss engineering firm BComp.

Koroyd™ – Koroyd™ is the lightest, most advanced damping core material Jones has ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Factory Tuned – All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Premium Eco Topsheet – Durable and scratch resistant bio-plastic topsheet made from castor beans that's engineered to provide exceptional abrasion and impact resistance while minimizing environmental impact.

Art by Shaun Gordon

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Personality / Flex: Stiff & Lively – 4/5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Carbon Injected Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit.

Flushcup Technology

3˚ Canted Foot Pillow

Control Flex Highback – Designed for balanced response and flex. Mid-wide profile and mid-stiff flex let you lock in turns or tweak airs.

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Hinge Connector Strap Attachment + Pre-Curved Ladders

Tool-Less Strap Adjustment

Zytech Buckles

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.