Directional Camber/Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex Rating – 2/5 | Friendly and Playful

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Medium 3D Contour Base – Freeride-focused 3D Contour Base featuring a spoon bevel in the nose and in the tail. Spoon bevel starts at the rocker point.

Directional Shape

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3D Flip Tips – 3D Flip Tip maximizes float in deep powder, enhances glide and turn initiation, while reducing tip catch in rough terrain.

Master Core – The Master Core is made of 1:1 Poplar to Paulownia ratio in alternating stringers to create a lightweight, poppy, and durable core.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Medium Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Premium Topsheet – Premium Topsheet is durable and perfect for daily use.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Personality / Flex: Friendly & Playful – 2 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Hanger 2.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer.

Flushcup Technology

3˚ Canted Foot Pillow

Dynamic Flex Highback – Mid-wide profile and friendly, ergonomic flex helps you turn, tweak and slash.

Asym Highback with Wider Lateral Side for Added Toe Side Turn Power

Stiff Middle Spine for Solid Carving Performance

Flexible Side Edges for Added Freestyle Performance

Tool-Less Forward Lean Adjustment

Highback Flex – 6 (1 Soft - 10 Stiff)

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Bombproof Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Flex Rating – 5 - 6 (1 Soft - 10 Stiff)

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V2 UltraCush™ Smartwool® Liner – This inner features Smartwool merino wool fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V2 Boot Harness – Customize your heel hold with the V2 harness as it works in tandem with the V2 liner to provide enhanced support and personalized fit.

BOA® Fit System with Vans Custom Focus – Custom Focus features a high-power coiler reel and a mid-power remote reel to control three zones of closure linked by Vans’ exclusive Custom Slide Guide, delivering concentrated closure around the instep area for focused heel hold.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V2 POPCUSH™ Footbed – A dual density footbed that combines impact cushioning with energy transfer, the V2 POPCUSH™ fights fatigue with anatomical shaping, TPU arch support, a nylon moisture-wicking topsheet, and a coring design with airflow perforations.

V2 Waffle Pro with All-Trac Rubber Compound – The V2 Waffle Pro is a progressively inspired and capability-driven design built for both on and off snowboard performance. Uncompromising natural flex and a weight-reducing, impact-resisting UltraCush midsole provide incredible boardfeel, while a Vans-exclusive pattern and All-Track rubber compound give you the confidence you need to scramble the sidecountry with confidence.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.