C2 Hybrid Directional Contour – Balanced all terrain performance in a powder-friendly shape

Firm Flex

G Lite 3 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

Triaxial / Biaxial Fiberglass – Strong and poppy

UHMW Sidewalls – Tough and fast

Sintered Knife Cut Co-Ex Base – Fast, tough and holds wax well

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

Eco Sublimated Poly Top – Tough and environmentally nice.

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

2 x 4 Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Auto Chassis

Offset Multi-Disk – The Offset Multi-Disk can be mounted on 4x4, 4x2, and the M6 Channel – without the need for an accessory channel-disk. The hole patterns are offset from the center for more toe-heel or stance-width adjustability

Slip Plate – The Slip Plate creates a smooth surface for your boot to slide across during entry and exit. Extra large UHMW panel sheds snow.

Canted footbed / Heelshock Pad – Canted 3° footbed padding centers riders balance while increasing drive and pop. Heel Shock Pad provides extra absorption from hard landings.

Solid Power Highback 8/10 – Solid highback design directs power for 100% control. Asymmetric shape provides ergonomic support for comfort and drive.

Auto Highback & Straps – When activated the highback flips up and the straps automatically close like magic.

Dual Band Ankle Strap Soft – A smaller surface area with a large cored compression window creates a soft and extra comfortable flex great for all mountain riding.

Flip Fit Toe Strap – oe strap can be flipped to customize fit on your boots. Leave in stock position for most boots or flip long side down for boots that are in the largest edge of fit range

LSR 2.0 Buckle – Second Generation Slap Ratchet automatically locks the buckle in place in both directions as soon as you stop ratcheting. No need to manually lock. Instantly dial in your preferred strap tension (for use with speed entry) or make quick adjustments on the fly.

Revolutionary Cube – Simply spin cube for the desired forward lean angle. It’s fool proof. Easily adjust on the hill. Urethane construction absorbs shock and vibration. Visual indicators let you know angle selected. In 3° increments from 10°~19°

Release Lever – Simply press and hold the Release Lever to lift boot up and out to exit binding.

Heel Pedal – Just insert foot and step on heel pedal to activate highback and strap closure.

Heel Roller – Ensures your boot easily slides in and out catch free with no friction.

Flex Rating – 6 - 9 (1 Soft - 10 Stiff)

Instep Flex Zone - Boa Specific – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Exocap Molded Toe Protection – A molded plastic toe cap provides maximum protection and extra space in the toe box to keep your toes wiggling and warm.

V3 UltraCush Liner with FlashDry™ – UltraCush interior cushioning layer with The North Face FlashDry™ for superior wicking performance / Expanded Comfort Flex neoprene forefoot / Updated X-Cage for superior heel hold / Dual-density, heat-moldable core / Closed-seam microsuede cuff and tongue

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

Hybrid Plus BOA® Fit System

V3 PopCush Footbed – Tri-density POPCUSH construction / OrthoLite® open-cell foam top layer / TPU arch support heel clip provides stability while allowing torsional flex / Advanced 3D-molded anatomical shape / Anti-fatigue coring design / Airflow perforations / Nylex moisture-wicking top sheet

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Waterproof Zipper Shroud and D Ring – This feature is a durable and weatherproof fabric shield that protects the lower part of your boot from snow, ice, and moisture, ensuring easy access to your Boa closure no matter what the weather throws at you. It also features a metal D-ring for securely fastening your pant gaiters to lock out snow.

Adaptive Range Mode – Features a Rear Drop-Cuff that can be unlocked to widen the cuff opening for expanded range of motion while walking or skinning.