Resort V1 + Flat Kick Tech – RESORT V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next-generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

Flex Rating – 3.5 (1 Soft - 10 Stiff)

Blended Radial Sidecut – BLENDED RADIAL sidecuts feature a single radius arc through the midsection of the board combined with a custom designed blend zone at the contact points. Varying the length of these blend zones and tailoring them specifically for certain aspects of riding greatly improves a board’s performance.

True Twin

Select 2.0 Core – Poppy lightweight core with no irregularities for uniform flex and consistency. New wood core profiling for youth-specific weight and flex optimization!

Special Blend Fiberglass – SPECIAL BLEND is an eco-friendly wet lay-up process that uses MAGIC BEAN™ resin component requiring lower consumption of energy and yielding higher technical properties. This adhesion process improves the factory’s working environment, as it does not contain some of the same harsh chemical characteristics used in resins at other factories around the world. This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

XXX (Truded) Base – The XXX[TRUDED] base material is a high density extruded base material that is durable and low maintenance. The relative surface strength equals a base that will last longer and be more durable when jibbing and ripping around the mountain

Digital Print

2 x 4 Inserts

Flex Rating – 5 (1 Soft - 10 Stiff)

Stage 5 | Duraflex – Duraflex material was specifically engineered to maintain consistent flex in a wide range of cold temperatures. Exclusive to Union for snowsports products.

EXT Thermoformed EVA Bushing – Multi-density bushings sustain their function each season - unlike urethane rubber or other materials that change color and become brittle over time.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

S19 Duraflex ST – Layered highback construction allows riders to achieve stronger edge to edge response while still maintaining tortional flexibility for a comfortable ride.

Tool-Less FLAD

ExoFrame 3.0 Ankle Strap – Rapid response, trusted by professional snowboarders.

TS 2.1 Tiles Toe Strap

Traditional Strap Adjustment

Aluminum S2 with Steel Base

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk – 2x4, 4x4, and Channel compatible.

Thermoformed EVA Disk Cover

Custom Flex

Skateflex

Backbone

Powerstrap

BOA Lacing