Camber – Tried and true, camber has been the dominant board bend in the snowboard industry for almost 40 years. Cambered snowboards deliver precise turning and edge control, with spring-loaded pop providing better jumping characteristics.

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Personality: 6-9 (1 Soft - 10 Stiff)

Pro-Tip™ – A tapered tip and tail thickness reduces swing weight for easier mobility.

Directional, 18mm Taper, Directional

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

Squeezebox – Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

The Channel® – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

The Hinge™ – Exclusive to EST® baseplates, this Burton-exclusive technology flexes dynamically with your leg for increased foot roll, less fatigue and easier ollies.

45% Short-Glass / Nylon Composite Lower – Carbon performance without killing your credit card.

30% Short-Glass / Nylon Composite Spar – Slightly more responsive than the 18% short‑glass/nylon composite, yet still plenty playful.

SensoryBED Cushioning System™ – Dual-density EVA automatically settles your boot into a natural position regardless of stance, width or angles for improved comfort, reduced fatigue, and more direct board control.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Heel Hammock – A reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightening fast response out of turns with your heel cradled in complete suspension.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Supergrip Capstrap™ 2.0 – Minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featuring Ultra-minimized and fully injected with an over-molded design. Made ultra-durable, glue-less, stitch-less and PU-free construction. 3D curved with a triple axis spine as well as a true wrap toe window.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Mounts Exclusively with Burton Boards Featuring The Channel™

Re-Ground Materials to Reduce Waste

Medium Flex: 6 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

1:1 Firm Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

Focus Cuff – Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle than the Lock-UP Cuff for increased response.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

Dual Zone Boa® System with Coiler™ and Lockdown Technologies – Powered by Burton Exclusive New England Ropes with the Boa Guarantee

EST® Optimized Midsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel. All without sacrificing an ounce of cushioning thanks to ultra-dampening ReBounce and B3 Gel inserts.

Vibram® Eco Step – Made of 30% recycled materials. This outsole has excellent grip and traction from rubber ice spikes but remains lightweight. ReBounce Cushioning, EVA and B3 Gel in the heel and toe area for extra comfort.

Vibram® MT Outsole