System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.

Flex Rating – 7-8 (1 Soft - 10 Stiff)

Directional – 8mm Taper

1.5° Fenders – 3D shaping lifts the contact points for improved turn initiation without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Grip Tech 1.25mm – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Highland III Core – A 5 / 20 blend of Poplar and Paulownia for lighter weight and higher performance. The HIGHLAND III has the highest ratio of Paulownia to Poplar

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Bio-Plastic Topsheet – One of the materials Arbor uses in the quest to eliminate harmful petroleum based plastics from the production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.

Real Wood Powerply – From the beginning, Arbor's Powerply veneer topsheets have been made with sustainable sourced wood and bamboo material whose organic fiber drives performance through natural power, strength and longevity. The individuality of each slice of veneer provides every board a one-of-a-kind aesthetic that is otherwise impossible to replicate.

Bio-Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

2x4 Inserts – 14 Pack

Flex rating – 3 (1 Soft - 5 Stiff)

System X – The System X design evenly distributes a rider's energy into their snowboard. No matter where pressure is applied to the binding, the System X allocates energy across the baseplate's structural X shape, and out to the four cardinal points. The result is quicker, more effective control. 15% glass content for added strength and stability.

50A TPE Outsole – The Outsole is a dampening interface made from a special TPE rubber. The Outsole integrates with the System X design and sits between the binding and a rider's snowboard. The Outsole diffuses high-frequency chatter while providing rebound and cushion for high-impact landings. On the Cypress, Arbor uses a slightly stiffer durometer TPE for added performance.

Fiberglass Reinforcing – The Hemlock and Sequoia, feature a 15% glass content for a softer, more forgiving ride; while the Cypress have 30% glass content for added strength and stability

Women’s Specific Adjustable Extruded Aluminum Heelcup

EVA Footbed

Women's Specific Asymmetrical Highbacks – Arbor bindings feature low mounted asymmetrical highbacks with 5° pre-rotation, providing ergonomic feel and freedom of movement.

Tool-less Forward Lean Adjustment

BioStraps – Arbor’s plant-based BioStrap takes the place of harmful petrol-based plastics focusing on heel lock and secure fit, with a comfortable curvature and low profile, single-injection ankle strap. Stronger, lighter, more sustainable, and the first of its kind.

Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.

UltraGrip Convertible Toe Strap

Cast Aluminum Buckles and Levers – Offering ultra-reliable performance with long-term durability and a tighter, stronger click for an unparalleled boot-to-binding connection.

Universal 4x4 Disc

Flex Rating – 6 - 9 (1 Soft - 10 Stiff)

Instep Flex Zone - Boa Specific – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Exocap Molded Toe Protection – A molded plastic toe cap provides maximum protection and extra space in the toe box to keep your toes wiggling and warm.

V3 Range Edition Ultracush with TNF Flashdry Liner – UltraCush interior cushioning layer / The North Face FlashDry materialization / Expanded Comfort Flex neoprene forefoot / Updated X-Cage for superior heel hold /Dual-density, heat-moldable core / Closed-seam microsuede cuff and tongue

Vans + TNF FLASHDRY™ – Vans and trailblazing outdoor innovator The North Face™ continue their partnership on the first-to-market FlashDry-equipped snowboard boot liner. FlashDry fabric technology is engineered to act like a second skin, pushing moisture to the surface and eliminating it as fast as possible. These fabrics are engineered to repel and resist wetting out to help provide quick-drying performance that keep the user dry and comfortable. Setting a new industry standard in moisture management and allconditions comfort, this technology has now been integrated into all of the Vans V3 UltraCush™ TNF FlashDry liners.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 PopCush Footbed – Tri-density POPCUSH construction / OrthoLite® open-cell foam top layer / TPU arch support heel clip provides stability while allowing torsional flex / Advanced 3D-molded anatomical shape / Anti-fatigue coring design / Airflow perforations / Nylex moisture-wicking top sheet

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Adaptive Range Mode – Features a Rear Drop-Cuff that can be unlocked to widen the cuff opening for expanded range of motion while walking or skinning.

Waterproof Zipper Shroud and D Ring – This feature is a durable and weatherproof fabric shield that protects the lower part of your boot from snow, ice, and moisture, ensuring easy access to your Boa closure no matter what the weather throws at you. It also features a metal D-ring for securely fastening your pant gaiters to lock out snow.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.