System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.

Flex Rating – 7-8 (1 Soft - 10 Stiff)

Directional Shape – 6mm Taper

Grip Tech 2.25mm – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

1.5° Fenders – 3D shaping lifts the contact points for improved turn initiation without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Highland III Core – A 5 / 20 blend of Poplar and Paulownia for lighter weight and higher performance. The HIGHLAND III has the highest ratio of Paulownia to Poplar

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

Vector Netting – A diagonal grid of Technora aramid fiber reinforcements that creates evenly distributed torsional power and accelerated response.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Bio-Plastic Topsheet – One of the materials Arbor uses in the quest to eliminate harmful petroleum based plastics from the production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.

Real Wood Powerply – From the beginning, Arbor's Powerply veneer topsheets have been made with sustainable sourced wood and bamboo material whose organic fiber drives performance through natural power, strength and longevity. The individuality of each slice of veneer provides every board a one-of-a-kind aesthetic that is otherwise impossible to replicate.

Bio-Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

2x4 Inserts – 14 Pack

Flex Rating – 7 (1 Soft - 10 Stiff)

Fiber Reinforced Nylon

Adjustable Heelcup

2° Canted Base

Reinforced Shovel Highback With Added Stiffness

Ankle Strap – Honeycomb TPU Material With Tooless Adjustment

Toe Strap – Dual Position TPU Material With Tooless Adjustment

Magnesium With Ergonomic Shape

Not Compatible With The Channel Mounting System

Flex Rating – 7 (1 Soft - 10 Stiff)

Rubber Reinforced Articulating Cuff Upper – Abrasion resistant reinforced outsole rubber is placed in areas of high stress to extend the life of the boot and increase durability.

Intuition™ Control Foam 3D Liner – Built with a blend of high and medium density Intuition® foam, this is our most versatile liner. With internal and external J-Bars and a 3D molded EVA insole, the Control Foam 3D liner is built to provide all-day comfort and support.

BOA® Conda™ Liner Lacing – A patented K2 liner lacing system that uses a urethane harness to gently hug your ankle, creating unrivaled heel hold. BOA® Conda™ allows for adjusting liner tightness and heel hold on the fly from outside of the boot, even with gloves on.

H4 Boa® Coiler – A cable and reel based lacing system that creates even tension and easy lacing operation. This system features low friction guides for even tightening. Boa® works to automatically retract lace slack so your boots stay nice and neat.

TX3 Lacing – BOA®’s first textile lace in the snowboarding category, TX3 is constructed from recycled PET with a structural core. This lace provices a softer, more flexible look similar to the characteristics of a traditional lace but the superior closure of a BOA® system.

3D Formed EVA Footbed

This Grips! Premium Rubber Outsole – A K2 exclusive built to offer the best possible performance at the lowest possible weight. An EVA midsole with Harshmellow™ pods makes this quiet underfoot, and a dual rubber compound provides unmatched grip for the parking lot and the boot pack.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.

Endo™ 3.0 – Endo 2.0 is the most technically advanced boot construction available. An injected heel counter construction adds strength and durability to your boot, giving it the same response season after season. The Endo 2.0 design allows for a more precise and smooth flex with a snappy rebound to power you out of any landing or turn. With an ultra durable TPU construction, the Endo 2.0 provides lasting comfort, response and durability for all styles of riding.

S’Cafe™ Coffee Mesh – With functionality and sustainability in mind, K2 coffee mesh is made from recycled post-consumer coffee grounds that is combined with post consumer recycled polyester. This mesh enhances odor control and moisture management of our standard lining mesh and is made from 95% recycled material with no added chemicals.