Head Kore 100 Ti Skis 2026
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
This Swiss Army Knife of the Kore Series (well, Austrian, actually) gets a new-found sense of power and confidence with the addition of two layers of Titanal to the proven Head geometry. Starting with a Karuba and Beech wood core and adding metal, graphene and flax along with full length capped sidewalls lets the Head Kore 100 Ti Skis do it all with more authority than ever before.
Product Details
Rocker Type
TNT Rocker – Ample rocker in both tip and tail for a playful ride that also happens to be superior in powder.
Core
Karuba and Beech Wood Core – Lightness and strength personified
Laminates
Dual Titanal® Layers
Graphene
Hybrid Top Surface with Flax
ISS (Independent Suspension System) – Rubber dampening layer over the edges.
Sidewalls
Beveled Sidewalls – A mini-cap over the top edge aids durability
Base
Structured UHM C Base
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
All-Mountain, Big Mountain
More
Terrain
All-Mountain All-mountain skis are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain. If you’re only going to own one ski to do it all, this is what you want. All-mountain skis generally have what we call mid-fat waists that range from 80-110 mm. Big Mountain Big mountain skis are designed for charging big lines with high speeds and big airs. These skis varry in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer side, often with more rocker in the tip and less in the tail.
- Skis: No Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Medium
More
Turning Radius
Medium 17-22 m radius is best for all-mountain and park & pipe.
- Core/Laminates: Flax, Metal, Wood
-
Tail Type:
Partial Twin Tip
More
Tail Type
Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
- Warranty: 2 Years
| Size (cm) | 170 | 177 | 184 | 191 |
| Tip Width (mm) | 133 | 133 | 133 | 133 |
| Waist Width (mm) | 100 | 100 | 100 | 100 |
| Tail Width (mm) | 122 | 122 | 122 | 122 |
| Turning Radius (m) | 17.2 |