Rocker - Camber - Rocker

Flex Rating – 7 (1 = Soft, 10 = Stiff)

Boat Flex – Boat flex combines a stiffer tip and tail to help settle the skis at speed, with a softer mid section, for big-time pop on request.

Elliptical Sidecut – Elliptical Sidecut is made up of a longer radius underfoot and shorter radii in the tip and tail of the ski. The long radius underfoot means you can pivot faster and easier, while a shorter radius in the tip and tail result in easier turn initiation. This sidecut allows for a wide variety of turn lengths, angles and mounting positions.

Symmetrical True Twin

Sustainable Poplar Wood Core – Poplar is a light-colored, medium-weight, durable softwood that flexes and pops nicely as well as having a whole load of vibration absorption capabilities. Used as the only wood in this core, it allows the ski to pop, butter and stomp like an all-mountain freestyle ski and also have enough torsional stability to grip impressively on the downhill.

Full Carbon Weave – Between 8 and 12 strips of carbon, sandwiching either side of the ski’s woodcore, are laid unidirectionally, providing extra stability to the ski, without adding weight to the build. Each carbon strip is woven into the fiberglass to provide strength and stiffness in the full length of the ski.

Carbon-Rubber Stomp Pad – A 600mm-long, 15mm-wide carbon/rubber reinforcement underfoot, above the edge, adds strength where it matters most to this playful all-mountain ski. In addition to protecting the wood core from heavy-duty impact on rails, the carbon and rubber inlay adds stability and vibration absorption under your boots, so that stomped landings feel better, both for you and your skis.

Full Strength Sidewall – A construction that places strips of protective material along the sides of each core, between the edge and the topsheet. Sidewalls provide the best possible edge hold and stability when the ski is engaged in a turn as well as protecting the woodcore and edges.

Anti-chip Micro-cap – Micro-cap is a hybrid of premium sandwich sidewall fused with durable lightweight cap construction. Provides strong edge hold, torsional stability, and protects joint prone to chipping.

XL 2.5mm Edges – Fractions of a millimeter might not sound like much, but when it comes to edges, it adds up. The 2.5mm edges stack an extra 25% of height on top of our already super-durable standard 2.0mm edges. This extra steel gives the rider a pair of skis that are going to take more abuse and last longer.

Graphics by Parade Studio, Paris, France

Bio-Based Resin

100% Renewable Energy Factory

Recycled Materials

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.