Elan Ripstick 88 Skis - Women's 2026 + Salomon Strive 12 GW Ski Bindings
Model Info
Elan Ripstick 88 Skis - Women's 2026 + Salomon Strive 12 GW Ski Bindings
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Elan Ripstick 88 Skis - Women's 2026
The bestselling Elan Ripstick 88 Skis undergo some design tweaks for the new season, with slightly reduced sidecut in all sizes aimed at making the ski more stable at speed and UD Carbon and Flax Fiber added to the layup. "Less hooky" and "more lively" are both good things for a ski that already was hugely popular as a frontside weapon among women in the know.
Product Details
Rocker Type
Amphibio Profile / Asymmetrical Design – The Amphibio profile is a revolutionary ski design that integrates both rocker and camber profiles into dedicated left and right skis. Amphibio skis feature a cambered inside edge assuring precision, edge grip, and stability while a rockered outside edge provides forgiveness, turning ease and smooth transitions.
Core
Tubelite Wood Core – To create the TubeLite Wood Core, two super lightweight Carbon tubes are inserted into a lightweight laminated wood core. Measuring 5mm in diameter and hollow in their construction, these tubes run along the length of the ski following the arc of the side cut. They provide torsional stability and powerful rebound while allowing for material reduction of the core. The result is incredible lightweight response and stability.
Laminates
Carbon Deck Technology – A construction using Elan's TubeLite Woodcore, Carbon Rods, UD Carbon, and Flax Fiber in a carefully prescribed layup for a combination of power and versatility
Vapor Tip Inserts – Vapor Tip inserts are advanced composites that are integrated into the tip and tail area of the ski‘s core. These inserts reduce weight and vibration, dramatically improving stability and ensuring a smooth ride even in the most demanding conditions.
Fiberglass – Fiberglass reinforcement optimizes the flex pattern and enhances torsional rigidity of the ski. The fibers are positioned either above or below the ski core and improve the ski’s structural integrity.
Carbon Rods – Lightweight Carbon tubes inserted into the ski and run the length of the ski following the arc of the side cut. The carbon tubes provide torsional stability and powerful rebound while allowing for material reduction of the core. The result is incredible lightweight response and stability.
UD Carbon – Unidirectional Carbon Fiber adds strength and life with minimal weight
Flax Fiber – Flax dampens vibration without adding extra weight
Sidewalls
SST (Slanted Sidewall Technology) Sidewall Construction – The SST Sidewall Construction provides quick, nimble and direct power transmission from the ski to snow as well as providing exceptional torsional rigidity.
Base
Sintered UHMW Base
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
All-Mountain
More
Terrain
All-Mountain All-mountain skis are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain. If you’re only going to own one ski to do it all, this is what you want. All-mountain skis generally have what we call mid-fat waists that range from 80-110 mm.
- Skis: No Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Short
More
Turning Radius
Short < 16 m radius is best for carving.
- Core/Laminates: Carbon, Wood
-
Tail Type:
Flat
More
Tail Type
Flat This is your traditional tail, designed to have edge contact all the way through the tail, and only designed for skiing forward. This is also preferred for alpine touring, as you can stick the tails of your skis in the snow.
- Athletes: Sammi Bushman
- Series: Ripstick
- Warranty: 2 Years
| Size (cm) | 147 | 154 | 161 | 168 | 175 |
| Tip Width (mm) | 125 | 125 | 125 | 125 | 125 |
| Waist Width (mm) | 88 | 88 | 88 | 88 | 88 |
| Tail Width (mm) | 104 | 104 | 104 | 104 | 104 |
| Turning Radius (m) | 11.8 | 12.8 | 13.8 | 14.8 | 15.8 |
| Indiv. Ski Weight (g) | 1410 |
Salomon Strive 12 GW Ski Bindings
Emulating the distinct design of the hybrid Shift bindings but with a new, lower and lighter LDN alpine toe, the Salomon Strive 12 GW Ski Bindings drop weight and get you closer to the snow for better snow feel, power transmission, and response. Compatible with both Alpine ISO 5355 and GripWalk ISO 23223 soles, the new Strive 12 GW sets the standard for lightweight precision.
Product Details
Toe Piece
LDN Toe – (Low, Direct, Neutral) Low center of gravity places the binding closer to the ski for better response and snow feel.
Automatic Wing Adjustment – Adapts automatically and easily to your boot width and height. It also keeps release values constant for worn out boots.
Automatic Toe Height Adjustment
Heel Piece
3 Part Heel Light – Low profile design with lighter construction
Additional Features
Low Profile Chassis – A low stand height improves your feel for the terrain and enhances power transmission to the ski.
Ski Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
- DIN / Release Value Low: 4
- DIN / Release Value High: 12
- Boot Sole Type: Alpine DIN (ISO 5355), GripWalk (ISO 23223)
- Series: Strive
- Warranty: 2 Years
| Size (mm) | 90 | 100 | 115 |
| Indiv. Binding Weight (g) | 920 | 920 | 920 |