
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
The Elan Ripstick 100 Skis are the Jill-of-all-Trades in the new Ripstick lineup, with a 100mm waist and enough rocker at the tip to handle deep conditions with ease. On the other hand, they also rip the groomed with authority and aren't too fat to navigate bumps and trees along the way. The latest model has been updated with Unidirectional Carbon and Flax Fiber in the layup for extra pop, snap and dampness.
Amphibio Profile – The Amphibio profile is a revolutionary ski design that integrates both rocker and camber profiles into dedicated left and right skis. Amphibio skis feature a cambered inside edge assuring precision, edge grip, and stability while a rockered outside edge provides forgiveness, turning ease and smooth transitions.
Tubelite Wood Core – To create the TubeLite Wood Core, two super lightweight Carbon tubes are inserted into a lightweight laminated wood core. Measuring 5mm in diameter and hollow in their construction, these tubes run along the length of the ski following the arc of the side cut. They provide torsional stability and powerful rebound while allowing for material reduction of the core. The result is incredible lightweight response and stability.
Carbon Deck Technology – A construction using Elan's TubeLite Woodcore, Carbon Rods, UD Carbon, and Flax Fiber in a carefully prescribed layup for a combination of power and versatility
Carbon Rods – Lightweight Carbon tubes inserted into the ski and run the length of the ski following the arc of the side cut. The carbon tubes provide torsional stability and powerful rebound while allowing for material reduction of the core. The result is incredible lightweight response and stability.
Fiberglass – Fiberglass reinforcement optimizes the flex pattern and enhances torsional rigidity of the ski. The fibers are positioned either above or below the ski core and improve the ski’s structural integrity.
UD Carbon – Unidirectional Carbon Fiber adds strength and life with minimal weight
Flax Fiber – Flax dampens vibration without adding extra weight
SST (Slanted Sidewall Technology) Sidewall Construction – The SST Sidewall Construction provides quick, nimble and direct power transmission from the ski to snow as well as providing exceptional torsional rigidity.
Sintered UHMW Base
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
| Size (cm) | 154 | 161 | 168 | 175 |
| Tip Width (mm) | 134 | 134 | 134 | 134 |
| Waist Width (mm) | 100 | 100 | 100 | 100 |
| Tail Width (mm) | 114 | 114 | 114 | 114 |
| Turning Radius (m) | 14.8 | 15.8 | 16.8 | 17.8 |
| Indiv. Ski Weight (g) | 1535 |
This all-new design for the proven Squire 11 gets modern shaping at the toe with an Anti-Ice Rail protective plate so you can safely scrape your boot sole on it without breaking the DIN window. With fresh colorways and improved step-in, the classic solution for women and lighter skiers is back, and it's better than ever.
Triple Pivot Light 2 Toe – GripWalk ready: Fits alpine and GripWalk soles
Anti Ice Rail – Use the metal rail to scratch off ice and snow below your boot sole.
Stainless Steel AFD Gliding Plate – MARKER bindings are equipped with a movable AFD (anti friction device) supporting a precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.
Hollow Linkage 2 Heel – Improved step-in performance: 30% less step-in force + easier entry with GripWalk boots.
Stand Height – 24 mm
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
| Size (mm) | 90 | 100 | 110 | 120 |
| Indiv. Binding Weight (g) | 820 | 820 | 820 |