Rocker Camber Rocker – Ski profile with rocker at the tip and tail, camber in the middle. Reducing the pressure on the edge at the tip and tail makes the ski even easier to handle and increases flotation on powder snow. The camber guarantees great grip on packed snow.

TrueBlend All Mountain Core – TrueBlend core of Beech and Poplar, tailor-made for each Anomaly model and each length.

Two-Piece Upper Titanal Laminate for Grip and Stability – No longer a single sheet of Titanal, the Anomaly series uses a two-piece laminate with a sheet of fiberglass in between the layers. The upper layer of metal resembles the shape of the FluxForm Titanal layer in the Rustler skis and the second layer fills in the gap in the center.

Lower Titanal Laminate – A full width Titanal laminate is placed under the core.

Full Length ABS Sidewalls – Provide direct energy transfer under the bindings and precision during the turn.

Sintered Graphite Base

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Full Action Toe | 45 mm Elasticity – Featuring 45mm of elastic travel and 180⁰ multi-directional release, the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission.

Dual Standard Concept (ISO 5355 Alpine and GripWalk) – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine and GripWalk soles.

Toe Lateral Elasticity – 45 mm

Turntable Heel – Look’s unique turntable design rotates directly under the tibia for reduced risk of injury and provides 28mm of elastic travel to deliver unmatched shock absorption for significant reduction of pre-release.

28mm Vertical Elasticity – 28mm of elasticity in the heel (the most of any binding on the market) yields a reduction in unwanted pre-releasing.

Smaller Mounting Zone – The shortest mounting zone of any alpine binding available provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex.

7 Points of Contact – More points-of-contact with the boot results in increased lateral energy transmission, drives more power to the edge of the ski and provides superior control, response, and snow feel.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.