
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Last season's introduction of the Maverick 105 CTI was a revelation, skiers who wanted a bit more power and stability than they got in the Bent series skis latched on to it and loved it for anything short of a knee-deep day. With ample float and more precision than the 115 CTI, the Atomic Maverick 105 CTI Skis simply get it done in any big mountain scenario.
All Mountain Rocker – 20% Tip Rocker / 65% Camber / 15% Tail Rocker
HRZN 3D Maverick / Maven Tip – Maverick and Maven’s sturdy HRZN 3D tip is reinforced with wood for added stability and smoothness when charging hard.
Power Woodcore – Poplar and Ash
CTI Powered – Carbon and Titanal are added to the laminate mix for agility and stability.
Reduced Fiberglass and Resin – Life Cycle Assessment analysis showed Fiberglass and Resin contributed disproportionately to the skis carbon footprint; more wood and less fiberglass, resin and metal reduces carbon dioxide equivalent emissions by 26%
Dura Cap Sidewall – Sidewall for power transmission combined with a small cap for durability.
Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.
World Cup Base Finish
Base Edge Angle – 1˚
Side Edge Angle – 3˚
Glossy Topsheet
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
| Size (cm) | 170 | 178 | 185 | 191 |
| Tip Width (mm) | 130.5 | 132.5 | 134.5 | 136 |
| Waist Width (mm) | 103.5 | 104 | 104.5 | 105 |
| Tail Width (mm) | 119.5 | 121.5 | 123.5 | 125 |
| Turning Radius (m) | 17 | 18 | 19 | 20 |
| Indiv. Ski Weight (g) | 2050 |
This all-new design for the proven Squire 11 gets modern shaping at the toe with an Anti-Ice Rail protective plate so you can safely scrape your boot sole on it without breaking the DIN window. With fresh colorways and improved step-in, the classic solution for women and lighter skiers is back, and it's better than ever.
Triple Pivot Light 2 Toe – GripWalk ready: Fits alpine and GripWalk soles
Anti Ice Rail – Use the metal rail to scratch off ice and snow below your boot sole.
Stainless Steel AFD Gliding Plate – MARKER bindings are equipped with a movable AFD (anti friction device) supporting a precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.
Hollow Linkage 2 Heel – Improved step-in performance: 30% less step-in force + easier entry with GripWalk boots.
Stand Height – 24 mm
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
| Size (mm) | 90 | 100 | 110 | 120 |
| Indiv. Binding Weight (g) | 820 | 820 | 820 |