CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 8 (1 Soft - 10 Stiff)

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Weightless Core – The Weightless Core strikes a critical balance between light weight and strength. Using a lower density species of Poplar in areas that are not as structured and Paulownia in the areas that are, Yes. was able to shave precious weight. This helps the board not only float, but "feel" floaty.

Biaxial Glass

Sintered Spec – The raw material is pre-consumer recycled (meaning it never left the factory) sintered base material. The heating and extrusion process softens it slightly, but it's still much harder than true Extruded.

Art by Brian Ray

2 x 4 Insert Pack

Flex Rating – 8 - 9 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Carbon Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Post – Nylon with 30% Carbon Fiber

FRC Carbon Highback with 3K Carbon Fiber

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over the original. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA.

Pro-Grip Toe Strap – Non-slip and grip is what you have with the Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Nylon with Carbon Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Medium (45 shore), and Hard (55 shore) Bushings