<a href=" http:

Rapid Access- Rapid Access is a revolutionary, simple, yet effective system. It features a pre-formed cuff that swings open and closed on a hinge. The system is made of three pieces: a regular cuff, a nylon hinge and a hinging cuff Dual Pivot- The proven patented Dual Pivot allows alignment in two dimensions, addressing performance, fit and comfort simultaneously. The axis alignment function allows the cuff to "hinge" or attach to the lower shell at different points

Flex Adjustment - 2 pos.- A two position flex adjustment is quick and easy to use. Utilize the tool that comes with the boot. Remove the flex plate and rotate to the desired position. Reinsert and tighten Hinged Instep Catch- The instep catch is on a hinge allowing it to adjust for better pressure distribution and closure. It can pivot away from the shell allowing the shell to spread without interference allowing easy entry & exit

Lycra Lining Insert- A lycra lining insert in the back of the liner offers a smooth, slippery surface which allows the foot to easily slide in and out of the boot aiding entry and exit Neoprene Toe Box- A neoprene toe box allows the front of the liner to expand, giving the toes the extra room they may need as well as additional warmth and comfort

F.I.T. System Tongue- The FIT system tongue is designed to move with the leg and shin while the boot is being flexed. The base of the tongue is attached to the liner with an elastic material that allows the whole tongue to slide Tongue Handle Pull Strap- A tongue handle pull strap, found on all models, aids in the entry and exit of the boot, as well as making sure the tongue is correctly seated for additional comfort and performance UltraFit2 Liner- Soft outside ethafoam conforms to the shell, THV material enlarged all around the foot, Thermoformable pre-molded EVA

www.fuzeqna.com/evogear/consumer/kbdetail.asp?kbid=162" target=new>Ski Boot Sizing Chart</a> 3 Density Constructions- 3 Density Construction is a combination of two different zones of hardness within the shell. Within 3D there are three variations that address different needs Twin Support System- The Twin Support System found in the upper cuff addresses the concept that skiing relies heavily on lateral movement. The design allows the pressure to be distributed laterally, which enhances performance