Atomic Backland 102 Skis + ATK HY 11 Free Alpine Touring Ski Bindings 2026
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Atomic Backland 102 Skis 2026
An all-new construction gives the Atomic Backland 102 Skis a much smaller environmental impact with arguably even better backcountry performance than the proven Backland 100. Weighing in at only 1430 grams per ski in a 179, the Backland 102 straddles the fine line between "light" and "capable" with grace and ease - if you only have room for one touring ski in the quiver, make it this one.
Product Details
Rocker Type
Powder Rocker – 20% Tip Rocker / 65% Camber / 15% Tail Rocker
Shape
HRZN 3D Backland Tip – Backland’s lightweight HRZN 3D uses a thin, perforated material to create a ski with low swing weight.
Core
Ultra Light Woodcore – Light Poplar and Caruba woods
Laminates
Reduced Fiberglass and Resin – Life Cycle Assessment analysis showed Fiberglass and Resin contributed disproportionately to the skis carbon footprint; more wood and less fiberglass, resin and metal reduces carbon dioxide equivalent emissions by 26%
Hardwood Binding Reinforcement
Topsheet with More Recycled Material
Sidewalls
Dura Cap Sidewall – Vertical underfoot with cap at the tips and tails
Base
Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.
Edges
Side Edge Angle – 87°
Base Edge Angle – 1.3˚
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
Alpine Touring
More
Terrain
Alpine Touring Also known as backcountry skis, alpine touring (AT) skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins. AT skis vary in width and weight, with the wider heavier versions usually used for winter/deep snow touring and the skinnier, lighter skis usually used for spring/summer/long distance touring.
- Skis: No Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Short
More
Turning Radius
Short < 16 m radius is best for carving.
- Core/Laminates: Wood
-
Tail Type:
Partial Twin Tip
More
Tail Type
Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
- Series: Backland
- Warranty: 2 Years
| Size (cm) | 164 | 172 | 179 | 186 |
| Tip Width (mm) | 127 | 129 | 130.5 | 132 |
| Waist Width (mm) | 101 | 101.5 | 102 | 102.5 |
| Tail Width (mm) | 117.5 | 119.5 | 121 | 122.5 |
| Turning Radius (m) | 17 | 18 | 19 | 21 |
| Indiv. Ski Weight (g) | 1430 |
ATK HY 11 Free Alpine Touring Ski Bindings 2026
ATK's done it again. After shaking up the tech touring binding world with their tough but light Evo tech bindings, ATK is going after the lucrative hybrid binding market with a vengeance. Fresh out of the gate and ready for its closeup are the ATK HY Free 11 Alpine Touring Ski Bindings, ready to rattle the cage of the most core freeriders with their all-metal construction, alpine--like downhill performance, and flat ski mode. To say their unique in the industry is an understatement, and at 675 grams per side they drop ~250 grams from the competition.
Product Details
Toe
Hy Free Toepiece – Releases laterally at the toe like an alpine binding
Easy Transitions From Ski to Tour Mode – Just flip the toe wings up 90˚
Full Metal Construction – Fully CNC'd alloy for ultimate durability
Sliding AFD Plate – For reliable release using ISO 9523 and Gripwalk ISO 23223 soles. Spacers included to adjust for different sole types.
Heel
Full Metal Construction – Fully CNC'd alloy for ultimate durability
7mm Elastic Travel – Smooths out the ride and reduces incidence of pre-release
25mm BSL Adjustment
Tour Mode
Three Climbing Positions – -18mm, +10mm, +34mm
Boot Compatibility
Requires Boots with Tech Toe and Heel Fittings – Compatible with ISO 9523 Touring and ISO 23223 Gripwalk soles
Additional Features
Weight – 675 grams per side
Crampon Shim Included – Compatible with most ATK crampons
Flat Ski Mode – No "high heeled" shenanigans required going downhill
Made in Italy
Ski Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
- Type: Tech
- Length: Any
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
- DIN / Release Value Low: 4
- DIN / Release Value High: 11
- Boot Sole Type: Tech, Tech Toe Only
| Size (mm) | 97 | 108 | 120 |
| Indiv. Binding Weight (g) | 675 | 675 | 675 |