The K2 Recon 120 MV Heat GW Ski Boots are the pick for strong skiers who hate getting cold feet before dropping in on consequential terrain. Boasting a smooth and responsive 120 flex, this fully heat moldable resort ripper has the backbone to keep up with aggressive riding, but is a bit more forgiving to throw around in soft snow and tight spaces. Capped off with Therm-ic heat systems integrated into the liners, the K2 Recon 120 MV Heat Ski Boots put the kabosh on cold feet -- no bulky battery packs, no wires!
Fast Fit Entry: Softer TPU designed into the instep area of Powerlite shell for quick and easy entry and exit.
Last: 100 mm: Performance medium fit for people with normal width and volume feet.
Fully Heat Moldable
Flex:
Flex: 120: A stiff flex suitable for advanced to expert level skiers.
Liner:
PrecisionFit Pro: Pre-molded and lasted with Ultralon heat moldable foams. Features an asymmetric tongue, pre-molded ankle pockets and a high density power collar for a firm but comfortable performance fit.
Therm-ic Heat System: Integrated heating system to keep your feet warm on cold days. Increases mobility and performance of foot muscles. Three heat settings provide warmth from 4 to 19 hours. Fully charges in 6 to 7 hours with a USB cable.
Shell Materials & Design:
PowerLite Shell: The shell is purpose-built to result in the best skiing, lightest weight boots ever produced. Made with four different stiffnesses of TPU and optimized wall thickness profiling, the Powerlite Shell achieves a paradoxical balance of lightweight agility and power. The resulting boots weigh in as some of the lightest alpine and freeride on the market, yet they ski with all the power and drive of heavier boots.
PowerFuse SpYne: A rear co-injected “Y” shaped design that adds strength and power to the Energy Interlock, the PowerFuse SpYne maximizes fore/aft flex efficiency and lateral stiffness for sustained performance and responsiveness in all terrain. Because of the SpYne, K2 is able to optimize materials in the cuff and shell, eliminating excessive vibrations in rough terrain.
Energy Interlock: A rivet-free technology that integrates the cuff and shell, putting less stress on the boot's material and produces a smoother, progressive flex.
Shell and Cuff: TPU (Thermoplastic Urethane)
Stance:
Dual Cuff Alignment: Dual sided cuff alignment for +/-2 degrees of cuff adjustment.
Cantable Outsoles: Advanced level of adjustability to customize stance angles. Shims can easily be placed underneath the outsoles to cant the boot to a skiers needs.
Forward Lean: 12˚ / 14˚ (with removable Power Wedge)
Buckles:
4 Aluminum Micro-Adjustable Lightweight Buckles
Power Strap:
45mm Ripcord Power Cinch Strap
Sole:
GripWalk® Outsoles Preinstalled: Removable and interchangeable ISO 9523 alpine rockered soles collaboratively designed to work with Marker's GripWalk binding system for better grip and added comfort when walking and standing in boots, but doesn't compromise the power transmission and release function between the boot and binding when skiing.
Specs
Ability Level:
Advanced-Expert
Advanced-Expert
Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you'll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
Ski Boot Flex:
Stiff
Forefoot Width:
100 mm
100 mm
Forefoot width, or last, is the reference width for this model based off shell size 26/26.5. Larger or smaller shell sizes will diverge from this reference width in increments of 2mm for every full size.
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
