If you're the kind of skier who picks the best lines, regardless of whether or not the lift goes there, the Dalbello
Panterra 120 ID Ski Boots are right up your alley. No-compromise downhill performance, with an adjustable width forefoot, walk/skin mode and grippy rubber hiking sole, mean you can take your show any place you can access under your own power. The Panterra 120 features Dalbello
's super responsive Cabrio shell design, but in a wider and higher volume package than the Lupo and Krypton series boots. Contour 4 fit technology "pre-punches" the most common boot fit problem areas, and as always, the Dynalink rearfoot retention system keeps your heel firmly locked in place for absolute control when the going gets burly. Get the most out of the mountain in the Dalbello
Panterra 120 ID Ski Boots.
VVF System - Variable Volume Fit - Dalbello's unique last adjustment system has a collapsing notch just under the tongue of the boot that allows you to adjust the forefoot width from 102 mm to 100 mm - simply tighten or loosen the lowest buckle and leave it - getting in and out of the boot with the buckle closed is no problem.
Contour 4 Shell-Fit - Exclusive Dalbello construction technology that maps the anatomical contours of the foot to create subtle "comfort zones" at 4 critical foot points: ankle, heel, 5th metatarsal & navicular. Relief contours molded into the inside lower shell at these 4 points provide a close and accurate fit and minimize the need for shell modifications.
Drive and Control Technology - Dalbello concentrates on proper heel wrap in the rear of the boot for full control and direct power transmission. Comfort and wrapping zones in the mid and forefoot are designed for better blood circulation and warmth.
SplitFit tongue for convenient entry and exit
Flex: 120 - A stiff, near-race flex suitable for hard charging expert skiers who still want a bit of give for booting and soft snow conditions.
Adjustable Flex - Thanks to a modular insert applied between shell and cuff, you will get 3 different degrees of flexion.
Kinetic Response Tongue - Highly resilient polyamide (nylon), flex ribbed tongue design stays in total contact with the leg throughout flex for improved responsiveness and control. Interchangeable design.
I.D. Panterra Liner - No-Tongue Overlapping Design // Instant Fit Design // No Heat Molding, step in possibility // 100% Custom Heat Moldable // Multi Density Ultralon® EVA Foam laminate construction
3-Piece Cabrio Design Architecture - Cabrio Design ski boots are uniquely engineered to incorporate 3 components: the lower shell, upper cuff and, and external shell tongue. This permits the use of stiffer plastics in the lower shell without affecting the smooth and progressive forward flex that's controlled with the shell tongue. This design strengthens the support around the foot for precise lateral transfer of power. Overall the advantage is smoother power transmission, progressive flex and dynamic rebound. Plus the boot is super convenient to put on and take off.
Shell / Cuff / Tongue - PU (Polyurethane) / PU / PA (Polyamide)
Dynamically Balanced Stance - Today’s modern rockered skis and lateral skiing technique require a much more upright and neutral (flatter) stance.
Rocker Stance allows skiers of all stripes to take full advantage of their equipment by centering their body mass over the sweet spot of their skis for more power and control with less effort. Easy turn initiation with no slide, feel the ski length, maintain edge pressure for better control.
Adjustable Heel Inclinator - Select Dalbello Panterra models feature an adjustable heel height mechanism. Raising or lowering the heel inside the boot can improve rearfoot and ankle comfort for some skiers. Changing foot angle also changes fore/aft balance which can improve ski response and turn initiation for some skiers.
Shaft Alignment (Canting) - The lateral orientation of the cuff in relation to the lower shell can be angled to match the angle of the skier’s lower leg when standing.
Ski/Hike Mechanism - Lightweight and compact, advanced function “Hike/Ski” control combines extended range of hiking/walking motion (Hike-mode), with solid, sensitive, and powerful ski control (Ski-mode). Feature enhanced with 2 Position Flex Control.
Inverted Forefoot Buckle - Forefoot closure buckles (above instep) are inverted to close on top of the boot shell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.
4 Micro Adjustable F16 Aluminum buckles (1 Inverted)
Velcro Power Strap
HyGrip™ Replaceable Soles - High traction rubber soles for security when walking or booting.
Rubber Clad Hike Sole - Bi-Injection P.U toes/heels + Rubber Arch Clad provide durability, stability and traction while walking & climbing.