Continuous Rocker – The rocker line that started it all. Speed and a fluid, predictable pop define this rocker profile designed to carry pace into the wake with minimal drag. A continuous rocker generates a longer trajectory with similar pop every time.

Full Length Curved Flow Channels – CFS's pull the board's primary edge deeper into the water on approach to the wake, maximizing a rider's pop.

Variable Edge Profile – There's an 8° bevel between the inserts, for forgiveness on wakes and rails. This angle sharpens near the tip and tail to increase edge hold.

Biolite 3 Core – The secret recipe HL has been perfecting since day one. This core is the gold standard in the industry and used throughout the line. Bio 3 is HL's lightest and most durable formula to date.

Monocoque Construction – Integrating the top glass and the bottom glass into one construction creates a more durable board against side impacts to prevent delamination.

Layered Glass – Over time, traditional woven glass fibers will separate. With layered glass, this deck will have the same pop off the double up year after year.

CarboNetX – Diagonal woven carbon fibers allow the board to store and release energy consistently throughout the ride. Crisscrossed fibers act like springs and tension cables delivering a responsive feel and added durability while accounting for less than 1% of the board's overall weight.

.75" Feature Fins (4)

M6 Inserts – Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.

Urethane Articulating Highback – This highback is pliable when flexed laterally, but offers support when direct pressure is applied. This means you can poke out those grabs without losing board control and support when you initiate a heel side edge.

Flexion Ankle Strap

Adjustable Toe-Strap

Aluminum Stability Plates – Raised teeth interlock with Hyperlite's System washer at your desired angle, reducing heel lift and solidifying the connection.

Baseless Interface – Removing the barrier of a baseplate, as found on most traditional wake boots, allows a rider to transfer energy directly to the board for the fastest and most precise edge response possible.

Ultra-Light G6 Polycarbonate Chassis

The System – Hyperlite System bindings are designed to work exclusively with their System Boot line (sold separately). Both components are needed for use.

Removable EVA Footbed – For riders that are looking for additional impact protection and slightly mellower feedback, the System Pro comes complete with a removable EVA footpad. This feature allows for the option of which setup is best for the conditions or location you're riding.

Tool-Less Hardware