Abrupt Continuous Rocker – This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated top and tail rocker creating added pop without sacrificing speed into the wake.

Satin Flex – Tailored specifically to a female rider's needs. A softer glass layup creates a softer flex and a board built to female riders standards.

Asymmetrical Design

Biolite 3 Core™ – The secret recipe Hyperlite has been perfecting since day one. This core material is the gold standard in the industry and used throughout their line. Bio 3 is Hyperlites lightest and most durable formula to date.

Layered Glass – Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.

Monocoque Construction – Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.

Molded-In Fins – In order to maximize durability of traditional construction boards, ABS is introduced into molded-in fin areas. This material reinforces the areas that usually wear down first.

M6 Inserts – Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.

Molded-In Toe Side Footbed Risers

Shaped by Aaron – Aaron has a solid pedigree in board design and he's responsible for everything that goes into a Hyperlite board today. No wonder he and Rusty devised the Marek which earned multiple "Board of the Year" awards. Always enhancing a wakeboard's performance, whether at the top end with our Kruz Nova or entry level with our bestselling State 2.0, he's Hyperlite's mastermind, killing it for boat and cable riders alike.

Hyperplush Rear Flex Zone – Reduces abrasion on the back of the leg.

Adjustable Floating Toe Design – A great choice for a setup that needs to fit multiple riders and varying foot sizes. Hyperlite's adjustable sizing is designed to accommodate a wide array of sizes without sacrificing comfort or performance.

Dual Quick-Cinch Lacing – Easily adjust the fit at the center and front of the lacing zone.

Low Pro Plate System – The Low Pro Plate System takes much of what HyperLite learned from the System Binding and incorporates it into a more traditional design. We began by reducing the overall volume by nearly 06%, which translates into a much lighter boot. Hyperlite's drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist, they connected the sidewalls to chassis create a stronger foundation.

Aluminum Claw Mounting System – The larger teeth design and aluminum hardware ensure a secure interface.

Dual Density Footbed