Hover Camber – Hover Camber combines traditional camber behind the front foot to the tail with an elongated early rise out to the nose. This raises the nose out of soft snow and allows the tail to sink in so you can surf effortlessly through the soft stuff.

Medium Flex

Directional – Directional boards have a raised nose and flatter tail and are designed to charge down the hill. With a longer nose than tail, these boards have unparalleled powder performance and stability in all conditions.

Poplar / Paulownia Woodcore – A blend of lightweight yet strong woods to provide power, precision and balance with consistent flex characteristics. Lighter yet stronger than our full Poplar core, this blend increases response and precision.

Tri-Axial Fiberglass – Fibreglass is laid up with fibres running in 3 different directions to provide a stiffer, more responsive flex and greater torsional rigidity to provide precision and power in a super stable and versatile package.

Carbon Beams – Strategic layups to increase pop, snap and precision without adding to the overall weight compared to traditional fibreglass only constructions. Carbon also adds flex memory, supporting the camber shape so the board remains lively over time. All Endeavor carbon layups are tailored specifically to each board to provide the ultimate performance enhancement.

Smoothride Sidewalls – Urethane sidewalls that are fused to the core to reduce vibration and impacts, similar to how urethane skateboard wheels create a smooth ride on rough concrete. It was so successful that it has now been adopted by numerous other brands.

Dura Surf 4001 Sintered – Durability and speed in a highly absorbent package means these bases will never slow you down. Lots of tiny pores open up to absorb wax every time you service to give you a superior slide. Dura Surf is the hardest base in the industry, known for its reliability, strength and speed. All Endeavor bases are die cut and pigmented and are finished with a belt sanding process and factory hot wax to perform straight out of the factory.

The Channel – The Channel is snowboarding's ultimate connection allowing for infinite stance options and rapid adjustment. The Channel is compatible with all major binding brands so why settle for less?

4 discs and 4 baseplates

Aluminum / Nylon

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models

Tesla T1 System – Tesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing Wire – A single built-in fatty climbing wire with a side arm lever. You can switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring, thanks to the T1 Heel Rest.

Snap to Ride – T1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

CNC Machined Aluminum – Built for big days on big lines, the Surge's solid baseplate design is preferred by heavier and more aggressive riders. Still quite lightweight, it offers maximum control and durability.

Pillow Line Straps – Surge Pillow Line Straps are lightweight - 53% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride.

Burton Buckles – All straps incorporate Burton's bomber buckles. Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests.

Rip 'N' Flip Highback – The Surge highback has a high amount of glass fiber fill for a stiff ride and maximum response. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

Compatible with Spark R&D T1 Heel Locker

Compatible with Spark R&D Ibex Crampons

Puck Compatibility – Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

In the Box – Bindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.

Weight – 1.49 lbs/ea (676g) - 2.98 lbs/pr (1352g) - Medium

Requires Spark or Voile Pucks - Sold Separately