3D Powder Hull Rocker Line – The 3D Powder Hull starts with a base profile that combines 2 distinct rocker lines that, when blended together, create a pronounced base concave in the nose and tail. The centerline is fully rockered starting from the insert packs, all the way to the tips of the bluntly shaped nose and tail.

4 – (1 Soft - 5 Stiff)

3D Powder Hull Design – The 3D Powder Hull starts with a base profile that combines 2 distinct rocker lines that, when blended together, create a pronounced base concave in the nose and tail. The centerline is fully rockered starting from the insert packs, all the way to the tips of the bluntly shaped nose and tail. Out at the contact edges, there is a more conventional base profile that Yes. uses on many of their other boards. The resulting concave across the nose and tail acts differently at the leading end of the board than it does on the trailing end when riding deep snow. At the nose, the concave draws air under the board causing lift and flotation. As the snow moves across the base it releases off the tail and the exaggerated rocker line along the center causes the tail to drop downward. So even though it's a perfectly balanced twin, the board rides through deep snow with the same pitch, or planing angle that you'd get with directional shapes and set-back stances.

Weightless Core – The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of poplar in areas that are not as structural and paulownia in the areas that are, Yes. is able to shave precious weight off of the board.

Triaxial Fiberglass

Sintered True – Pellets or course powder is pressed until it forms a solid. True sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. Takes wax well.

2 x 4 Insert Pack