Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

Flex Rating – 7 (1 Playful - 10 Precise)

BAP Core – Bamboo. Aspen. Paulownia. K2 has blended three species of renewable timber to assemble a core that’s strong, lightweight, and designed to enhance dampening without the addition of other materials.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

Carbon Backbone™ – Built in a pre-loaded cambered shape and placed between the binding inserts, the Carbon Backbone™ helps by adding extra snap between the feet to increase pop from the highest load-zone.

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market, the Wax-Infused Sintered 4001 Base holds wax longer than other sintered bases for smoother, longer lasting glide.

2 x 4 Inserts

Flex Rating – 6 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

AM1 Highback – K2’s new AM1 Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.

Flex Rating – 7 (1 Soft - 10 Stiff)

Rubber Reinforced Articulating Cuff Upper – Abrasion resistant reinforced outsole rubber is placed in areas of high stress to extend the life of the boot and increase durability.

Intuition™ Control Foam 3D Liner – Built with a blend of high and medium density Intuition® foam, this is our most versatile liner. With internal and external J-Bars and a 3D molded EVA insole, the Control Foam 3D liner is built to provide all-day comfort and support.

Boa® Conda™ Liner Lacing – A patented K2 liner lacing system that uses a urethane harness to gently hug your ankle, creating unrivaled heel hold. Boa® Conda™ allows for adjusting liner tightness and heel hold on the fly from outside of the boot, even with gloves on.

H4 Boa® Coiler – A cable and reel based lacing system that creates even tension and easy lacing operation. This system features low friction guides for even tightening. Boa® works to automatically retract lace slack so your boots stay nice and neat.

TX3 Lacing – BOA®’s first textile lace in the snowboarding category, TX3 is constructed from recycled PET with a structural core. This lace provices a softer, more flexible look similar to the characteristics of a traditional lace but the superior closure of a BOA® system.

3D Formed EVA Footbed

This Grips! Premium Rubber Outsole – A K2 exclusive built to offer the best possible performance at the lowest possible weight. An EVA midsole with Harshmellow™ pods makes this quiet underfoot, and a dual rubber compound provides unmatched grip for the parking lot and the boot pack.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.

Endo™ 2.0 – Endo 2.0 is the most technically advanced boot construction available. An injected heel counter construction adds strength and durability to your boot, giving it the same response season after season. The Endo 2.0 design allows for a more precise and smooth flex with a snappy rebound to power you out of any landing or turn. With an ultra durable TPU construction, the Endo 2.0 provides lasting comfort, response and durability for all styles of riding.

S’Cafe™ Coffee Mesh – With functionality and sustainability in mind, K2 coffee mesh is made from recycled post-consumer coffee grounds that is combined with post consumer recycled polyester. This mesh enhances odor control and moisture management of our standard lining mesh and is made from 95% recycled material with no added chemicals.