Early Rise™ – Tip and tail lift away from the snow to bring the contact points closer to the center of the ski. This increases a ski's lift in deep snow and allows it to engage more quickly on hardpack.

Rocker Profile – 4mm Tip / 4mm Camber / 4mm Tail

Symmetric Flex™ – The same flex pattern in front and behind your boot conforms to terrain equally riding forward and backwards.

Flex Rating (1 Soft - 8 Stiff) – 7

5-Cut™ – Five different radiuses are blended into the ski's sidecut. The result? A wide variety of turn shapes and an intuitive feel.

Early Taper™ – The widest part of the sidecut begins tapering earlier in the tip and tail which reduces tail hook ups in powder.

Thin Tip™ – Super thin core & sidewall in the tips are 100 grams lighter per pair for reduced swing weight & tip bounce.

Maple Macroblock – Solid maple under foot with lightweight aspen at the tips for durability and reduced swing weight.

Carbon Ollieband – Prestretched carbon down the center of the ski for added pop and play in Line's freestyle skis.

Capwall™ Construction – The best of both worlds! Cap on the top for light and playful performance with sidewall over the edge for added protection.

Fatty™ Base – 30% thicker base. 1.7mm thick base dramatically increases durability and tuning life of these skis.

Fatty™ Edge – 2.2 x 2.5mm edge for increased durability and tuning life.

Tuff Top™ – Textured tougher top materials for more abuse, less scratches and a longer, better looking life for the investment on your feet.

Reference Size – 178 cm

Stance Back from Center – -30mm

Mounting Distance from Tail – 84.8cm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Permanence – Permanence breeds ultimate convenience. With PHANTOM, you apply the formula once at any point in your ski or snowboard’s life cycle, whether new or used. It’s that simple. PHANTOM’s sophisticated, timed polymerization process permanently penetrates the entire thickness of the base material with powerful go-fast fluoro compositions designed to operate across all snow temperatures. Even when the ski or snowboard goes into a shop for stone grindings, the next fresh layer of PHANTOM is exposed –– ready to glide.

Performance – Unless you are constantly waxing with correct temperature specific waxes, PHANTOM is faster across all conditions over time because its performance is consistent: you never suffer the glide degradation that occurs when conventional wax quickly wears away.

Environment – The innovation centers around the inclusion of glide-friendly fluorocarbon functional groups, but in a superior, new delivery method that renders them inert and harmless to humans, plants and animals. PHANTOM doesn’t cause biological damage, and doesn’t present any long-term environmental risks.

Home Application – PHANTOM can be applied by an individual with access to direct and consistent UV sunlight to activate and cure the formula. Ideally, this should be done during the Spring, Summer, and Autumn seasons when the sun is high and temperatures are. For proper PHANTOM application, it’s critical for there be strong, direct sunlight and temperatures over 32ºF / 0ºC. Cure time is roughly 2 hours total, with another 20 minutes of prep work and brushing to complete the application. DPS also recommends base cleaner or a fresh stone grind prior to application.

Cure Station – PHANTOM can be applied professionally by an Authorized PHANTOM Installer using a Cure Station. The process takes approximately 15 minutes for part A, and 15 minutes for part B, with minor additional preparation and soak time. This is the most precise and fast method to apply PHANTOM to skis or snowboards, and is a reliable all-season solution during the low light winter months, especially in more extreme latitudes, and in wetter climates where sunshine isn’t as consistent.