AR Freestyle Rocker – Rockered tips and tails are combined with positive camber underfoot to allow the ski to charge with ease through unpredictable snow and maintain a solid carve when asked to do so. Turn the whole mountain into your playground.

Flex Pattern (1=Soft, 10=Stiff) – Tip: 6 | Waist: 7 | Tail: 6.5

Pop-Lite Core – Lightweight wood is combined with a higher density, stiffer species in a horizontal laminate to create an impossibly lively ski that has all the power needed for boosting to new elevations.

Spin Tip – Lightweight material in the tip and tail allows for increased maneuverability for the ski when in it's in the air.

AR75 Sidewalls – Sidewalls provide improved edge pressure under the boot, while cap constuction in the tip and tail provides smooth turn initiation and less hookiness - 75% sidewall, 25% cap.

S7 Base – Durable and low maintenance, with a speed additive for quickness.

2.2mm Impact Edge – Heat treated, built to avoid excess weight while maintaining durability.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Full Action Toe | 45 mm Elasticity – Featuring 45mm of elastic travel and 180⁰ multi-directional release, the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Dual Standard Concept – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine and GripWalk soles.

Turntable Heel – Look’s unique turntable design rotates directly under the tibia for reduced risk of injury and provides 28mm of elastic travel to deliver unmatched shock absorption for significant reduction of pre-release.

Long Elasticity – 28mm of elasticity in the heel (the most of any binding on the market) yields a reduction in unwanted pre-releasing.

Smaller Mounting Zone – The shortest mounting zone of any alpine binding available provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex.

7 Points of Contact – More points-of-contact with the boot results in increased lateral energy transmission, drives more power to the edge of the ski and provides superior control, response, and snow feel.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 103 mm – Wide fitting last combines an expanded volume forefoot and toe box area with a closer fitting rearfoot and ankle area. Comfortably accommodates a wide range of foot shapes with max foothold and exceptional comfort.

Contour 4 Shell Fit – Contour 4 Technology is a revolutionary technological advance in performance ski boot fitting. The anatomical contours of the inside sidewalls of the boot-shell, as well as the innerboot lasts, are precisely “mapped” to the shape of the typical high performance skier’s foot. A little extra “space” is molded into the inside of the boot shell at 4 critical fit points: ankle, heel, 5th metatarsal, and navicular.

Cuff Hyperband – This wide profile shin pad offers extreme versatility, low friction and fit & function.

Split Fit Tongue – Dalbello’s Split-Fit Tongue has a unique fore-aft sliding design that allows the tongue to accommodate a taller instep comfortably. The sliding function also allows for extremely easy entry and exit.

Flex: 110 – Stiff but not too stiff, this flex is the perfect compromise between all mountain mobility and big mountain control.

Kinetic Response Tongue – Highly resilient polyamide flex ribbed tongue stays in permanent contact with the leg for improved responsiveness and control. Interchangeable flex stiffness.

IF Performance – The IF Performance stands for immediate fit at the first step in and still giving the opportunity to heat-fit 60% of the liner within 4 minutes. It's medium density Ultralon foam ensures great performance and a comfortable fit.

Total Landing Gear Tongue – Revolutionary XRD material is strategically placed in the shin area of the tongue to absorb impact for less fatigue and eliminate shin bang.

Shell / Cuff / Tongue – PU (Polyurethane) / PU / PA (Polyamide)

Cabrio Design Architecture – Dalbello's 3 Piece Cabrio Design architecture has been the cornerstone of their performance, all mountain and freestyle models for more than a decade. This unique construction combines a 3 piece construction assembly - shell/cuff/tongue - that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello's Cabrio models provide the ultimate in responsive performance to ski your best. Cabrio Design permits the use of stiffer and more rigid plastics in the lower shell. This strengthens the support around the foot and lower leg providing quick response and precise transfer of power to the ski edges. This design also prevents the lower shell from distorting and bulging as the boot flexes, making the boot more smooth and stable at high speeds and on irregular terrain.

Total Landing Gear Cuff – Softer PU material spans a “V” cut in the upper cuff providing a slight amount of stretch to absorb landings without compromising performance or control.

Dynamically Balanced Stance – Foot angle, cant angle, and cuff inclination engineered into the shell and cuff positions skiers in a balanced and centered stance for optimum dynamic performance.

Adjustable Cuff Alignment – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Low Cuff Hinge Point – High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs. The low hinging cuff permits the boot cuff to more easily follow the natural movement of the skier’s legs because it has a longer range of forward and rearward hinging motion.

Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Dynalink Rearfoot Retention – Dynalink is an independently functioning heel/instep closure band assembly that secures the skier's foot in the middle and rearfoot sections of the ski boot. During boot flex, the Dynalink band does not permit the foot to slide forward or the heel to lift lifting inside the boot shell.

Inverted Forefoot Buckle – Forefoot closure buckle above the instep is inverted and designed to close on the top of a boot shell, not the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Twinstep Closure – Two position buckle closure allows for optimized pressure distribution over the instep.

40mm Velcro Strap

Orthofit Performance Insole

Total Landing Gear Heel – XRD material absorbs shocks and vibrations for smoother skiing and less fatigue.

Dura-Grip™ – Replaceable, durable high-durometer polyurethane toes & heels for extended boot sole wear.

Replaceable ISO 5355 Alpine Soles

Grip Walk Outsoles [Sold Separately] – Provides increased safety and improved natural roll thanks to a curved rubber sole and includes a high-profiled, slip resistant sole.