J Skis The Allplay "Margaritaville" Limited Edition Skis 2015

J Skis The Allplay "Margaritaville" Limited Edition Skis 2015

SKU# EB-85906-1001

$590.00

Shipping

Not available for shipping

Find in Store

Checking availability...

Order and get 590 reward points

Earn 590 points with this product. Join Free

Free shipping on orders over $50

Details

Lowest price guarantee

Details

366 Day Return Policy

Details

J Skis The Allplay "Margaritaville" Limited Edition Skis 2015 171 cm $590.00

J Skis The Allplay "Margaritaville" Limited Edition Skis 2015

On-mountain Cinco de Mayo celebrations simply aren't complete without the J Skis The Allplay "Margaritaville" Limited Edition Skis. Take your spring skiing, scratch that, all of your skiing to the next level with the Allplay's 98 mm width, smooth and buttery wood and quad layered glass core. A progressive rocker profile and just the right amount of camber/rocker blend makes the Allplay a truly multi-dimensional ski, handling park to a few inches of fresh snow like Jimmy Buffett sipping the smoothest tequila.

Product Details

Rocker Type:

Rocker / Camber / Rocker: 3 mm x 28 cm length / 3 mm Camber / 3 mm x 28 cm length

Parabolic 4 Radius Rocker: J Skis have designed their Rocker Tips by blending 4 different radii into one smooth parabolic curve from the last point of the camber to the very tip, just like a surfboard. The result is a much, much, much smoother profile tip shape that has no abrupt kinks, flat spots or awkward changes. Your tips will rise up out of the snow with less effort and you’ll lay down carves that utilize much more of your full edge length always feeling intuitive. Parabolic 4 Radius Rocker

Flex:

Flex: 3/5: Medium supportive flex underfoot to stomp landings & hold a solid edge all over the mountain. The symmetric tip and tail flex is rated #3, not too stiff, not too soft. Plenty of support to keep you on your feet yet enough flex for fun butters or big ollies.

Core:

The Allplay Construction

Aspen: An incredibly lightweight wood that provides plenty of strength when laminated alongside Maple. At the tips of J Skis you’ll see more of the light colored Aspen, 4 x 20 mm wide Aspen laminates covering approximately 70% of the surface area for for dramatically reduced swing weight. Aspen

Maple: A very expensive high quality hard wood, thus the reason it’s used to build floors and furniture to last a lifetime. When used as a ski core, it: absorbs impact, has a ton of energy, keeps your binding screws in. And most importantly, maple syrup tastes great. J Skis run 4 x 20 mm wide Maple laminates the entire length of the core. Under your foot the core is comprised of approximately 80% Maple & 20% Aspen, with solid Maple over the edges for unprecedented power & durability. Maple

Laminates:

Quasi Isotropic Fiberglass: Fiberglass works like a guitar string. When it is flexed it wants to flex back, that’s the energy or pop you feel in a ski. However, this energy can only be applied in the direction of the actual fiberglass length. This means the more directions of fiberglass, the more energy, pop & responsiveness. (forward, side to side, torsional, etc.) Industry standard “Triaxial” fiberglass runs in only three directions: 0, 45, -45. J Skis uses a Quasi Isotropic fiberglass configuration, same as the aerospace industry, to maximize energy & strength in as many directions as possible. J Skis fiber runs on 4 different axes: 0, 90, +45, -45, again more cost, but worth the performance.

Rubber Dampening: Think of a ski like a phone book, every page = layer of material in the ski. Then bend your phone book and you’ll see every page slide against each other: this is “shear”. This shear force tries to separate and thus delaminate all the layers in your ski every time it’s flexed. J Skis won't build a ski without running a layer of thin rubber around the full perimeter of the ski over the entire edge, plus the full width of the tip and tail. The rubber acts as an insulator so that the edge and other materials can slide against each other when flexing without delaminating to dramatically improve durability. Rubber Dampening

Sidewalls:

Full Height Sidewalls: J Skis uses good ol’ durable, fast, impact absorbing Ultra High Molecular Weight base material for sidewalls. For the same reason it's used on your ski's bases, UHMW is great at absorbing vibrations & resisting impact. Take a metal pipe and hit it against a rock, then do the same with a piece of plastic. The metal vibrates through to your bones & the plastic absorbs the vibration for you. That’s the difference with having plastic shock absorbing sidewalls over your edges. J Skis cuts the sidewalls to a 10° angle, with a nice step at the bottom for a nice long tuning life. Full Height Sidewalls

Base:

Thickest Base: J Skis always matches base & edge. J Skis uses the thickest base in the industry, 1.8 mm. It’s a sintered Ultra High Molecular Weight Polyethylene, super hard and super fast.

Edges:

Thickest Edge: J Skis officially uses the thickest edges in the industry; 2.5 mm x 2.5 mm. More metal = more durable. Whether you’re accidentally hitting a rock or purposely sliding a rail, your edges will live a much longer life. You’ll also be able to re-tune many more times or file them round to slide rails longer.

Graphics:

Margaritaville Limited Edition: 100 Pair Limited Edition, hand signed and numbered by Jason Levinthal.

HD Graphic Digital Printing: Ski & Snowboard companies use the traditional, age old process of silk screening which is very labor intensive, requires high volumes & has a very low resolution image quality, you've seen the dots! J Skis uses a state of the art Fuji UV Flat bed printer, a machine that enables printing any image in photo real high resolution from a computer directly to the plastic top & base like you would at home on your inkjet printer. The resolution is unbelievable photo real and allows for on-the-fly printing as many or as few quantities wanted, with no additional costs. The result...you're one of few in the world with skis looking as good as these on your feet.