Continuous Rocker – The rocker line that started it all. Speed and a fluid, predictable pop define this rocker profile designed to carry pace into the wake with minimal drag. A continuous rocker generates a longer trajectory with similar pop every time.

Satin Flex – Tailored specifically to a female rider's needs. A softer glass layup creates a softer flex and a board built to female riders standards.

Wider Profile – With more surface area, this board gets more pop off the wake and provides a solid foundation.

Reduced Tip & Tail Thickness

Single Tunnel with Complete Exit

Variable Edge Profile – Rounded between the inserts, sharpening under foot, and then cupped at the tip and tail, this board delivers edge hold when you want it and forgiveness when you need it.

Monocoque Construction – Integrating the top glass and the bottom glass into one construction creates a more durable board against side impacts to prevent delamination.

Layered Glass – Over time, traditional woven glass fibers will separate. With layered glass, this deck will have the same pop off the double up year after year.

Dual Fin Positioning – Dial in your board's personality with fin placement options.

0.8" P-Wing (4)

M6 Inserts – Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.

Adjustable / Fixed Floating Toe

Dual Quick Cinch Lace Zones

Hyperplush Rear Flex Zone

Aluminum Claw Mounting System – Large teeth and aluminum hardware ensure a secure interface.

Low Pro Plate System – The Low Pro Plate System takes much of what HyperLite learned from the System Binding and incorporates it into a more traditional design. They began by reducing the overall volume by nearly 16%, which translates into a much lighter boot. The drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist, they connected the sidewalls to chassis create a stronger foundation.

Dual Density Footbed