Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board's nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Directional Flex Pattern

Flex Rating (1 Soft - 10 Stiff) – 8

Directional Shape

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Ultra ISO Core – Triple-density core featuring stringers of ISO Core -- a foam/fiberglass composite that's as stiff as any wood but 15% lighter. Hardwood beech stringers are positioned along the edges for added durability.

2x TeXtreme® Carbon – Specially designed carbon fiber that is podium proven in the America's Cup and Tour De France. TeXtreme achieves a weight savings of about 20-30% compared to conventional carbon fiber.

Fiberglass Reinforcement – Fiberglass layer improves pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one -- precise and playful.

Stainless Steel Reinforcement – Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled Black ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered Ultra Base – World Cup proven race base made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) modified with special Fluoro and Paraffin based additives for better glide and increased durability. Ultra base is harder and faster than any other sintered base.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Inside Traction Tech 2.0 – Inner edge Traction Tech improves splitboard edge grip on ascent. Three side cut "bumps" on each side of your binding keep you locked in on icy skin tracks no matter which way you are traversing.

Outside Traction Tech 2.0 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Fusion Tech – Jones' exclusive production process allows the traditional topsheet layer to be replaced with ultra durable epoxy layer for saving weight and material.

Quick Tension Tail – All Jones splitboards (except Discovery Split) now feature a notch cut into the tail of both skis that allows the Quick Tension Tail Clip fastener to simply slide into the notch and secure the skin.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Karakoram Ultra Clips – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

70% Mohair / 30% Nylon – Jones Nomad and Nomad PRO climbing skins are both made with a blend of 70% natural mohair fiber and 30% synthetic nylon. The mohair offers unmatched glide and a supple skin feel while the nylon improves grip and water repellency.

Universal Tip Clip

Quick Tension Tail Clip – The Quick Tension Tail Clip is a lightweight tail clip system designed to fit all 2016 and newer Jones splitboards (except Discovery). Jones splitboards have a notch cut into the tail of both skis that allows the Quick Tension Tail Clip to simply slide into the notch and secure the skin. New for 2018, the Quick Tension Clip has been completely redesigned and now features a durable rubber tail strap and compact metal clip.

Glide Tech – Glide Tech coating reduces friction on each skin fiber so neither super-cold fresh snow or wet, hot snow will stick to the skin and rob energy-saving glide.

Rubber Safer Skins – Jones Nomad PRO skins are laminated with a rubber backing that prevents skins from getting waterlogged. Drier skins are safer as they are less likely to lose adhesion to your skis in critical situations.

Ever Dry – Jones skins are treated with Ever Dry anti-glopping treatment. The coating keeps the skins from absorbing moisture and prevents snow/ice build-up under the skin.

Grip Tech – Grip Tech skins are made with a special material that works well under dynamic tension and has a high resistance to twisting and abrasion.

Includes 1 Pair of Nomad Pro Skins, 2 Backing Sheets, 1 Skin Bag, and 1 Cheat Sheet.

9 Pre-Cut Sizes – See size chart for the size that corresponds to your specific board model and board length.

Fits all 2016 and newer Jones splitboards (except Discovery).

Tesla T1 System – Tesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing Wire – A single built-in fatty climbing wire with a side arm lever. You can switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring, thanks to the T1 Heel Rest.

Snap to Ride – T1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

CNC Machined Aluminum with Maximum Cutouts – The Arc Pro splitboard binding is extremely lightweight for long tours, epic overnighters, trees, and steeps. The baseplate is CNC machined with maximum cutouts to shave weight yet maintain strength and performance while incorporating Spark's industry-leading Tesla T1 binding anatomy.

Pebax® Pillow Line Straps – Pro Pillow Line Straps are made with Pebax® plastics, a premium material most often found in high-end ski boots as it provides consistent stiffness and improved toughness in cold temperatures while being 20% lighter. Ultradurable, comfortable, waterproof, one-piece molded construction, and produced 100% in-house. Arc Pro ankle straps have a smaller footprint than the Surge Pro and feature a flex window for max agility while maintaining support.

Buckles & Pebax® Plastics – Ladders and adjusters are produced in-house with Pebax® premium thermoplastics which maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. It's also 20% lighter than Spark's standard material. All straps incorporate Burton's time-tested bomber buckles.

Carbon Reinforced Highbacks – The Arc Pro Rip ‘N’ Flip highback is made from carbon reinforced nylon in a ratio designed for medium flex and a surfy feel. This material blend is more responsive, lighter, and stiffer than our standard glass reinforced highbacks. All Rip ‘N’ Flip highbacks incorporate a tool free forward lean adjuster (FLAD) for complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

Puck Compatibility – Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Compatible with Spark R&D Ibex and Ibex Pro Crampons

Compatible with Spark R&D T1 Heel Locker

Pro Hardware – Weight savings add up by replacing stainless steel hardware with custom-made 7075-T6 aluminum hardware. Aluminum parts are 65% lighter than standard stainless steel parts and are made with hex drives instead of phillips heads which are less likely to strip.

Weight – 1.22 lbs/ea (552g) - 2.43 lbs/pr (1104g) – Medium

Requires Spark or Voile Pucks - Sold Separately

4 discs and 4 baseplates

Aluminum / Nylon

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models