Skip to Main Content

Spark R&D Arc Splitboard Bindings 2019 + Spark Pucks

sku# 149766
Spark R&D - Arc Splitboard Bindings 2019 + Spark PucksSpark R&D - Arc Splitboard Bindings 2019 + Spark PucksSpark R&D - Arc Splitboard Bindings 2019 + Spark Pucks
Model Info
This item qualifies for Free Shipping! Details

Buy Now Pay Later - Get 6 months to pay on purchases over $199 Learn More.

Product Info

Splitboard Binding

Spark R&D Arc Splitboard Bindings 2019

Backcountry gear should be lightweight, durable, and simple: the Spark R&D Arc Splitboard Bindings tick all three boxes. Their T1 system uses an integrated snap toe ramp to positively lock into touring brackets and over any splitboard pucks, making for hassle-free transitions. There are no pins to lose in the snow, no cables to work around, and no reason to take your gloves off. The system sheds snow well, fighting frustrating ice-ups and time-consuming clogs. In touring mode the T1 interface is solid and quiet, with no side-to-side play. The aluminum baseplates have cutouts that minimize weight without compromising strength, setting you up for lightning-fast ascents. In ride mode the Arc highbacks have a soft, surfy feel, perfect for the pow you're working for. Spark R&D is a pioneer in the splitboard world, and the Arc shows it.

Product Details

Tour Mode

Tesla T1 SystemTesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing WireA single built-in fatty climbing wire with a side arm lever. You can switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring, thanks to the T1 Heel Rest.

Ride Mode

Snap to RideT1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

Baseplate

CNC Machined Aluminum with Maximum CutoutsThe Arc splitboard binding is lightweight for long tours, epic overnighters, trees, and steeps. The baseplate is CNC machined with maximum cutouts to shave weight yet maintain strength and performance while incorporating Spark's industry-leading Tesla T1 binding anatomy.

Puck Access Through BaseplateFor easy stance adjustments. Arc models only.

Straps

Pillow Line StrapsArc Pillow Line Straps are lightweight - 46% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride.

Buckles

Time-Tested Burton BucklesAll straps incorporate Burton's bomber buckles. Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests.

Highback

Rip 'N' Flip HighbackThe Arc highback has a moderate amount of glass fiber fill for medium flex and a surfy feel. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

Compatibility

Compatible with Spark R&D Ibex Crampons

Compatible with Spark R&D T1 Heel Locker

Puck CompatibilitySlide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Additional Features

In the BoxBindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.

Weight1.34 lb/ea (606g) - 2.67 lb/pr (1212g) - XS/S

Specs

  • Ability Level: Intermediate-Advanced More 
  • Mounting Pucks: No
  • Made in the USA: Yes
  • Warranty: 5 Years
Size S M L
Weight (g) 1244
Splitboard Hardware

Spark R&D Spark Pucks

The new Spark R&D Spark Pucks give you almost unlimited stance options for splitboards with standard insert patterns. The oversized aluminum discs overlap the binding channels for enhanced rigidity and mount strength. Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models.

Product Details

Includes

4 discs and 4 baseplates

Materials

Aluminum / Nylon

Features

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Compatibility

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models

Specs

  • Mounting Pucks: Yes
  • Made in the USA: Yes
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location