Powder Rocker – Large, gradual tip rocker for optimal float in deep snow. Flat camber underfoot. Short tail rocker allows the ski to smear and pivot when needed.

Elliptical Rocker Profile – The rocker profile and tip shape are combined into one progressively changing elliptical arc, which allows the tips to plane faster in powder, deflect less in variable snow, and helps the effective edge running within the rocker length to engage in a natural, effortless way.

Tour Flex | 7.5 (1 Soft - 10 Stiff) – Similar to ON3P's Freeride Flex, but with a rounder underfoot platform designed for improved float and maneuverability in softer conditions.

Asymmetrical Reverse Elliptical Sidecut (RES) – An asymmetrical RES profile is designed to be completely powder specific. The inside edge uses the foundation of previous RES designs, providing a catch free ride in soft snow while maintaining the ability to get to and from the lift. To optimize powder performance, ON3P has asymmetrically tapered the outside sidecut of the ski to ensure that the skis flow more smoothly in and out of a powder turn, and decreases weight when it's on edge.

Tip Taper – Tip taper allows for a smoother release on turns, decreased swing weight, and a less catchy ride feel in variable conditions. Used throughout ON3P's line and matched with their rocker profiles to maximize effective edge while maintaining maneuverability.

Tour Layup – A redesigned, thinner core profile supported with two layers of full-width carbon fiber results in a lightweight, tour-oriented ski.

Bamboo Core – The heart of every pair of ON3P skis is a FSC-certified, vertically laminated, 100% bamboo core. Bamboo is more durable, longer lasting, and provides a feel to the ski that no wood can match.

Tri-Axial Fiberglass – 19 oz or 22 oz tri-axial fiberglass provides torsional and longitudinal stiffness, ensuring proper edge hold and power transfer.

Unidirectional Carbon Stringer – Each ski incorporates unidirectional carbon around the core, adding pop, stiffness, and dampness without any significant increase in weight.

Vibration Dampening Strips (VDS) – VDS rubber is applied to the edges & sidewalls, acting as a shear layer that provides improved bonding strength and vibration dampening.

Extra Wide Binding Mat – An additional layer of fiberglass mat prevents pullouts. To ensure proper coverage for all types of hole patterns, ON3P runs their mat full width on every ski they make. Their binding mat is double-bias fiberglass, increasing torsional stiffness.

UHMW Sidewalls & Tip Spacers – UHMW (Ultra High Molecular Weight Polyethylene) is an incredibly strong material, has a higher abrasion resistance than steel, and resists cracking (unlike ABS).

1.8 mm 4001 Durasurf Sintered Base – ON3P's Durasurf 4001 base material provides their skis with better glide and protection from damage compared to any other sintered and extruded base material, and is 50% thicker than the industry standard.

2.5mm x 2.5mm Extra Thick Edges – ON3P uses a 3/4 wrap for their 2.5mm x 2.5mm Rockwell 48 Steel Edges.

3/4 Wrap Edges – The edges don't wrap all the way around the tips and tails the way other brands build skis. 3/4 wrap edges allow the tips and tails to flex naturally, which prevents delamination.

Nylon Topsheet – Sublimated nylon topsheet is chip-resistant, to ensure you always look your best.

Factory Finish – A meticulous 32 step finishing process - including a perfect, two-part base structure, hot wax + four hour hot box treatment, and a polished, beveled, detuned edge, allows skiers to mount and ski every ON3P out of the wrapper.

Made in Oregon by ON3P – Every single pair of ON3P Skis is built by an ON3P employee in their Portland, Oregon factory. No shortcuts or OEM - ON3P does it themselves. Design, build, sell, shred -- the American way.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.