Tip & Tail Rocker – Makes the ski turn-friendly and allows for a stiffer flex setup. Only the shovel and tail zones bend upwards, with traditional cambering in the middle for pop.

Full Twin Tip

Multi-Layer Wood Core – Völkl freeskiing models feature a multi-layer wood core that features two different densities of wood. In the binding attachment area, a dense, ash core is used, while in the rest of the ski, the core is poplar. The more dense wood creates more secure screw retention, preventing binding pull-out, and the soft, supple poplar section allows for resilience and snap. The flex pattern is tailored to each ski model, depending on the desired performance.

Carbon Stringers – Additional band of carbon in the layup for direct transmission, agility and life.

Full Sidewall – Direct and strong power transmission with full length sidewalls.

P-Tex 2000 Base

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFT is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.

Triple Pivot Elite Toe Piece – With a horizontally oriented spring, it provides the highest energy absorption to reduce the risk of early release. The secure purchase on the boot lug optimizes power transmission and allows for durable, high energy use. The performance to weight ratio of the Triple Pivot toe is truly unmatched in the industry.

Inter Pivot Heel – This industry-leading construction delivers superior holding power for all types of freeskiing. Its design focuses power in the direction of the boot sole, increasing elasticity. The overall design creates optimum power transmission.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 - 102 mm – Dalbello's VVF technology gives this boot an adjustable forefoot last that can vary from 100 mm to 102 mm simply by closing the front buckle in a different notch.

My Fit System – The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Flex: 100 – A medium flex perfect for intermediate to advanced all mountain skiers.

IF Performer Liner – The IF Performer comes with medium density heat moldable Ultralon foam in the main fitting zones of the boot (60%) and provides the best fit - either out of the box or in 4 minutes of heating only.

Cabrio Design Architecture – Dalbello's 3 Piece Cabrio Design architecture has been the cornerstone of their performance, all mountain and freestyle models for more than a decade. This unique construction combines a 3 piece construction assembly - shell/cuff/tongue - that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello's Cabrio models provide the ultimate in responsive performance to ski your best. Cabrio Design permits the use of stiffer and more rigid plastics in the lower shell. This strengthens the support around the foot and lower leg providing quick response and precise transfer of power to the ski edges. This design also prevents the lower shell from distorting and bulging as the boot flexes, making the boot more smooth and stable at high speeds and on irregular terrain.

DB Hyperlite – With a perfect blend of ski boot techno-polymer, dbHyperlite is a lightweight performance polymer that provides superior anti-shock and vibration control characteristics.

Adjustable Cuff Alignment – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Ski/Hike Mechanism – Lightweight and compact advanced “Hike/Ski” control combines extended range of hiking/walking motion (Hike-mode), with solid, sensitive, and powerful ski control (Ski-mode). Feature enhanced with 2 Position Flex Control.

Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Dynalink Rearfoot Retention – Dynalink is an independently functioning heel/instep closure band assembly that secures the skier's foot in the middle and rearfoot sections of the ski boot. During boot flex, the Dynalink band does not permit the foot to slide forward or the heel to lift lifting inside the boot shell.

Inverted Forefoot Buckle – Forefoot closure buckle above the instep is inverted and designed to close on the top of a boot shell, not the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Velcro Power Strap

Grip Walk Outsoles [Sold Separately] – Provides increased safety and improved natural roll thanks to a curved rubber sole and includes a high-profiled, slip resistant sole.