Tip & Tail Rocker – Bends up only in the shovel and tail zones, with a camber shape in the middle.

3D.Ridge Carbon – Central woodcore ridge with super-slim wings to significantly reduce weight and swing weight and keep the stability where necessary. Combined with Full Carbon Jacket for stability.

Moderate Taper – Moderate setup of tapered tips for an all mountain oriented combination of precision on piste and easy handling off piste.

Multi Layer Woodcore Lite – The combination of beech and poplar results in a very durable wood core composed of hard wood in the binding area and very light wood in the other areas.

ICE.OFF Topsheet – The unique surface structure and material composition reduces icing as the snow simply slides off the topsheet. This leads to a drastic reduction of weight in use, on average up to 20% to 30%. In addition, mainly white graphics support the anti-icing effect. Lighter skis prevent fatigue, especially on long and steep uphill sections.

Powered by Titanium – A metal layer just under the topskin delivers dampness and power at speed.

Full Carbon Jacket – Material layup for direct transmission and high reliability/stability at the lightest possible weight.

Center Sidewall – Direct and strong power transmission with partial sidewalls in the center of the ski, combined with the super-slim 3D.Ridge construction.

P-Tex 4500 Base – A sintered, ultra-high molecular polyethylene base with an extremely high density. Besides a great wear resistance and perfect wax absorption, this base material is extremely fast and exclusively used on Volkl's top of the line and race models. The material has been upgraded with special additives to make it thermal and electro-conductive and proves its qualities with premium glide and maximum speed in races.

SkinPin – A skin fastening system that is magnificent in its simplicity: perfect fixation and easy to use; full functionality without unnecessary bells and whistles. The skin is attached by inserting its pin through a shaped hole in the shovel of the ski. The skin is then rotated 90° to lock it in place. Once rotated the skin fixation is 100% reliably secured. The system can be monitored by the skier from above at any time to provide visual peace of mind. The hole in the tip of the ski is also helpful for building a rescue toboggan in an emergency.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Kingpin Toe – The PinTech design on the KingPin toe piece promotes an ergonomic rolling up the foot and the most direct possible connection to the ski. Six steel springs capture the energy optimally, up to a DIN setting of 13. Individually adjustable positioning blocks make it quick and easy to step in no matter what the conditions.

Updated Toe – These bindings have updated toe pieces from Marker and are not affected by the August, 2018 recall.

Kingpin Heel – The revolutionary heel construction for the PinTech bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings.

Kingpin Climbing Aid | 0° / 7° / 13° – Good climbing aids have one thing in common: Whatever the situation, they can be operated by feel, even when the skier can't see them clearly. Simplicity is a virtue here, and reduced exertion is even better. The KINGPIN wins hearts and minds through two integrated climbing aids (7° and 13°) that are easily deployed or stowed using the basket of the pole. They can also be operated conveniently using the tip of the pole, allowing them to work with any basket style. Because the climbing aids are positioned in the upper center of the heel piece, they are always easy to reach.

Walk / Ski Modes – The refined locking/unlocking procedure for the heel piece is part of the binding's charm. It takes just one step to switch from walk to ski mode: Simply flip a lever, push down on the heel and you're good to go. The mechanism works even in critical situations and challenging descents.

One Size Fits All – Boots with tech toe fittings are required.

TÜV Certified to ISO/DIN 13992:2007 – The Marker Kingpin is one of only a few tech touring bindings to have passed the ISO/DIN 13992 standard.

Stand Height – 21 mm

Recommended Skier Weight – 100 - 230 lbs

Crampon Compatible – 80, 90, 105, and 120 mm versions available separately.

Two Brake Sizes – 75-100 mm and 100-125 mm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.