Freeski Tip and Tail Rocker – Makes the ski turn-friendly and allows for a stiffer flex setup. Only the shovel and tail zones bend upwards, with traditional cambering in the middle for pop.

3D.Ridge Technology – Völkl's revolutionary 3D.Ridge construction features a distinctive ridge down the center of the ski that bevels out to a very thin edge both in front of and to the rear of the binding. This significantly reduces inertial mass at the perimeter of the ski, increasing agility.

Moderate Tip & Tail Taper

Multi-Layer Wood Core – Völkl freeskiing models feature a multi-layer wood core that features two different densities of wood. In the binding attachment area, a dense, ash core is used, while in the rest of the ski, the core is poplar. The more dense wood creates more secure screw retention, preventing binding pull-out, and the soft, supple poplar section allows for resilience and snap. The flex pattern is tailored to each ski model, depending on the desired performance.

Tough Box Construction – Völkl protects the goods (in this case the Multi Layer Wood Core) with a composite and fiberglass sheath for resilience, durability and snap.

Carbon Stringer

Full Sidewall – Direct and strong power transmission with full length sidewalls.

P-Tex 2100 Base – A sintered high-density and high molecular polyethylene base with great gliding characteristics and high durability.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFT is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.

Triple Pivot Elite Toe Piece – With a horizontally oriented spring, it provides the highest energy absorption to reduce the risk of early release. The secure purchase on the boot lug optimizes power transmission and allows for durable, high energy use. The performance to weight ratio of the Triple Pivot toe is truly unmatched in the industry.

Inter Pivot Heel – This industry-leading construction delivers superior holding power for all types of freeskiing. Its design focuses power in the direction of the boot sole, increasing elasticity. The overall design creates optimum power transmission.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 mm – Performance fit and above average instep height for average width feet.

C.A.S. Shell – Custom Adaptive Shape shells are anatomically formed around the heel and problem areas at the factory. Common punch zones are plainly marked with a dot grid pattern on the shell, and the new polyether and Triax 3.0 shell materials offer improved stability when heated.

Quick Instep – A shaped plastic component at the instep that is softer than the rest of the shell helps you to step into and out of the ski boot.

C.A.S. Grindable Boot Board – The removable C.A.S. boot board offers plenty of thickness for grinding and a grid pattern for reference.

Flex: 100 – Medium to Stiff flex for advanced skiers.

Quadrafit Ultrafit Liner – A comfortable, thermoformable fit featuring 3D EVA rubber ankle protector padding.

Shell – Polyether

Cuff – Polyolefine with plastic insert in rear spine

Adjustable Cuff Alignment – Double Oversize Canting

4 Micro Alu Buckles

35 mm Power Strap

ISO 5355 Bi-Material Alpine Sole