All Mountain camRock – All Mountain camRock technology pulls the traditional contact point of the tip back about 25% creating slight tip rocker to aid the camber under foot. The result - increased flotation, velocity and maneuverability in soft snow as well as significantly increased easy of turn initiation in any condition.

Balsa Core CA – A microlam construction made up of carbon layers and many thin balsa wood stringers stacked side by side, which provide strong stability and a powerful feeling while remaining lightweight. This damp feeling allows skiers to rip through any and all conditions.

Prepreg Carbon – Two carbon laminates above and below the core.

Sandwich Construction

ABS Sidewalls – Helps dampen hard landings while decreasing vibration fatigue.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFT is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.

Triple Pivot Elite Toe Piece – With a horizontally oriented spring, it provides the highest energy absorption to reduce the risk of early release. The secure purchase on the boot lug optimizes power transmission and allows for durable, high energy use. The performance to weight ratio of the Triple Pivot toe is truly unmatched in the industry.

Inter Pivot Heel – This industry-leading construction delivers superior holding power for all types of freeskiing. Its design focuses power in the direction of the boot sole, increasing elasticity. The overall design creates optimum power transmission.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 mm – Perfect for most average width, average instep height feet.

Asymmetrical Toe Box – K2 matches the toe box to the natural curvature of your toes for a more precise and comfortable fit.

Navicular Punch – A bump is pre-formed in the navicular area of the medial ankle where many skiers experience pressure.

FitLogix™ Design – A design philosophy that puts your skiing first, optimizing foot comfort and boot performance.

Flex: 100 – A stiff, but short of race stiffness flex for advanced to expert all mountain skiers

LuxFit Tour Intuition® Liner – A lasted, thermo moldable liner that gives you a perfect full custom fit.

Lasted Liner – Lasted liners are formed around a standard foot shape for improved out of the box comfort.

Moldable Asymmetric Tongue – Offering a left / right specific lower leg fit and is heat moldable for ultimate customization.

Cuff / Shell – Polyurethane

PowerFuse SpYne – A rear co-injected “Y” shaped design that adds strength and power to the Energy Interlock, the PowerFuse SpYne maximizes fore/aft flex efficiency and lateral stiffness for sustained performance and responsiveness in all terrain. Because of the SpYne, we are able to optimize materials in the cuff and shell, eliminating excessive vibrations in rough terrain.

Forgiving Shell Materials – SpYne construction allows the use of more forgiving materials at the cuff / shell junction, making entry and exit of the boots easier.

Dual Adjustable Cuff Alignment – Adjust +/- 2.2 degrees on medial and lateral sides for a total range of 4.4 degrees. This enables adjustment to the lower leg angle for maximum comfort and performance.

Power Wedge – A removable spoiler for adjustable forward lean angle from 12 to 14 degrees.

Synchro Interlock – A user-releasable cuff lock based on the Energy Interlock system, the Synchro Interlock system can be released for hiking or skinning and locks down securely for skiing.

6060-T6 Light Alloy Buckles – Extruded hardened aluminum alloy build with a minimalist lightweight design.

Wider Third Buckle – A wider catch and ladder for better distribution of force

35mm Velcro Power Strap

Padded Mid-Grip – Duel Injected Thermo Plastic Rubber (TPR) for added grip and traction while walking on rocks or riding on snowmobiles.

Replaceable Outsoles – Dual-injected Thermo Plastic Rubber (TPR) with Thermo Plastic Urethane (TPU) increases the life of your boots and provides secure footing whether walking on rock, ice, or stairs.

Integrated Tech Fittings – Fully integrated into the shell injection instead of just the outsole pods, making K2 outsoles compatible with both DIN Alpine and Tech bindings.