Amphibio® Profile – Elan's unique design uses distinct "Left and Right" camber profiles - camber on the inside edges and rocker on the outside ones. The result is power and precision on the more heavily weighted inside edge with easier pivoting and smoother turn transitions on the outside edge.

Tubelite Woodcore – To create the TubeLite Wood Core, two super lightweight Carbon tubes are inserted into a lightweight laminated wood core. Measuring 5mm in diameter and hollow in their construction, these tubes run along the length of the ski following the arc of the side cut. They provide torsional stability and powerful rebound while allowing for material reduction of the core. The result is incredible lightweight response and stability.

Fiberglass – A fiberglass reinforcement optimizes the flex pattern and enhances torsional rigidity of the ski. The fibers are positioned either above or below the ski core and improve the ski’s structural integrity.

VaporTip Inserts – Strong and dynamic Tubelite woodcores are paired with lightweight composite Vaportip inserts in the tip and tail of the ski to lighten swing weight and reduce vibration, dramatically improving the ski's ride qualities.

SST Sidewall – The SST Sidewall Construction provides quick, nimble and direct power transmission from the ski to snow as well as providing exceptional torsional rigidity.

TNT Technology – Elan’s unique TNT technology is a combination of innovations that provides the best balance of light weight construction with power and performance. The core of the TNT Technology is the Tubelite Wood Core with carbon rods along the edges of the ski, combined with Vapor Tip Inserts. The end result is an extremely lightweight high performance ski with exceptional power, cushioning and stability.

Climbing Skin Notch at Tail

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Dual Action Toe

Toe Lateral Elasticity – 45 mm

Four Points of Contact – Four points of contact with the boot provide maximum power transmission.

High Vertical & Lateral Elastic Travel – Provides shock absorption and reduces inadvertent release.

Dual Standard Concept – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine boot soles and WTR (Walk-to-Ride) rockered boot soles.

Easy Step-In / Step-Out – Wider heel throw offers easy and intuitive entry-and-exit.

Long Lever Arm – Makes unclicking from the bindings effortless.

Heel Vertical Elasticity – 12 mm

Lightweight Composite Materials

Ramp° – 0.3°

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 97 mm – A narrow last for slim and low volume feet.

Bootfitter's Notes – The new Lange RX lasts are noticeably more relaxed in width and instep height than in years past - if you've had trouble fitting in a Lange performance boot before, you may find the new boots much more comfortable.

Flex: 80 – A softer flex for newer or lighter skiers.

Dual 3D Sport Liner – A liner pre-formed twice in 3D. The inside of the liner is pre-formed to support the foot while the outside is pre-formed to the shape of the boot to limit movement and thus ensure superior precision and power transfer.

Dual Core Technology – A new "Power Injection" method allows Lange to inject two different durometers of plastic simultaneously through 5 injection ports, with the two plastics being directed to specific parts of the boot. The harder plastic goes to the heel, spine and lower shell to retain stiffness, while the softer plastic goes to areas that wrap the foot and lower leg for comfort.

Shell – Polyurethane

Cuff – Polyurethane

Forward Lean – 12˚

Ramp – 4˚

Canting – +/- 1.5˚

4 Aluminum Race

35 mm Velcro Strap

Replaceable Polyurethane Grip Soles