Powder Rocker – 30% Tip Rocker / 40% Camber / 30% Tail Rocker

HRZN Tech Tip and Tail – HRZN Tech Tip & Tail takes an ABS sidewall construction and blends it with a revolutionary across-the-ski, horizontal rocker. It adds 10% more surface area in tip and tail for awesome float – plus less tip deflection and better tracking through chop. The ultimate design for powder skiers.

Light Woodcore – Made from poplar wood, this core optimizes the ski's weight without sacrificing any shock absorption or stability.

Carbon Backbone – An ultra-lightweight carbon insert that runs the length of the ski like a stabilizing backbone. This provides exceptional agility and edge hold with no extra weight.

Dura Cap Sidewall – Sidewall for power transmission combined with a small cap for durability.

Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily

Atomic Edges – Atomic edges are made from steel five times more wear resistant than standard steel, for strength and perfect grip.

Glossy Topsheet

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Dual Mode Toepiece – MNC (Multi-Norm Certified) for skiing, including Alpine, Grip Walk, WTR, and ISO 9523 soles. Converts to a tech toe for touring (requires a boot with tech toe fittings).

Automatic Wing Adjustment – Automatic adjustment just by stepping-in. You can forget but nevertheless trust your binding!

Toe Height Adjustment – Adjustable toe height to let you switch between different boot norms.

Easy Step-In – Less effort needed to step-in and out of bindings

XL Wings – Long wings for a great envelopment of the boots.

Lateral Elasticity – 47mm

Sliding Toe Pedal

Freeski Brakes – Self-retracting brakes for a close position to the heel so they never catch.

Hike and Ride Switch – Lever at toe shifts between hike and ski mode.

Accessing Toe for Touring – 1. Pull back on block between toe wings to open tech arms. 2. Depress front lever to widen arms to step in. 3. Pull up on lever to lock arms securely for skinning.

Preparing Heel for Touring – Pull back on the brake pad and fix the brake in the "up" position by stepping down on the pad.

Climbing Aids – 2° & 10°

MNC (Multi-Norm Certified) – Certified for use with ISO 5355 Alpine, ISO 9523 Alpine Touring, and WTR (Walk To Ride) boots.

Tech Toe Fittings Required For Use In Uphill (Touring) Mode

Requires Boot with Full Heel and Toe Lugs – Not compatible with boots like the Dynafit Hoji Pro Tour and TLT, Atomic Backland, Salomon X-Alp and Arc'teryx Procline, among others. These boots have shortened or non-existent lugs and will not fit into the Shift in downhill mode.

Low Profile Chassis – Low stand height for increased terrain feedback and enhanced power transmission.

Oversized Platform – Wide footprint and double aluminum frame tubes create a super strong interface between boot and ski. Ensures maximum lateral power transmission.

+Elastic Travel – Ultimate elastic travel to hold in boots during impact in order to go bigger with no risk of pre-release.

Compatible with Salomon S/LAB Shift Crampons

Carbon-Infused PA Construction

Adjustment Range – 30mm

Height – 30mm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 mm – An average width and volume last fits most feet.

Flex: 120 – A stiff flex designed for expert or heavier skiers.

Precisionfit Pro Tour Liner – Pre-molded and lasted with Ultralon heat-moldable foam. Featuring an asymmetric tongue, a high-density power collar, and a tour notch at the back of the ankle for increased comfort and range of motion while hiking and skinning.

Powerlite Shell – K2's highest performance shell design, utilizing shell walls of varying thickness and four different types of TPU to provide the ultimate combination of light weight and responsiveness.

Fastfit Instep – Softer TPU material is used in the instep area of select models' shells for quick and easy entry and exit.

Fully Heat-Moldable – Both the boot's shell and cuff are capable of being heat molded to a variety of foot shapes for a truly custom fit.

TPU Cuff

Powerlock Spyne – A performance-oriented walk mode designed for ski touring that offers a 50-degree range of motion. When in ski mode, Powerlock Spyne provides a powerful and secure connection for uncompromised downhill performance.

Friction Free Cuff Pivot – An easy hinging cuff pivot designed to provide minimal resistance while in walk mode.

4 Micro Adjustable Light Alloy

Cam Strap

GripWalk ISO 23223 Outsoles – Removable and interchangeable rockered soles designed to work with GripWalk binding systems for better grip and comfort while walking, standing, and hiking.

Integrated Tech Fittings – Tech fittings in the toe and heel are fully integrated into the shell injection, allowing for compatibility with both tech and DIN bindings.