AR Nose Rocker – Traditional sidecut profile with tip rocker - for all mountain ripping.

Flex Rating (1 Soft - 10 Stiff): Tip: 6 | Waist: 7 | Tail: 6.5 – Fluid, mid flexing ski that isn't overpowering.

Traditional Shape w/ Tip Rocker

Power-Lite Core – Stability, power and control are paramount in this 100% woodcore enhanced with hardwood stringers. For those looking for the ultimate in smoothness.

Carbon Kevlar Struts – Carbon and Kevlar stringers used in the tip and/or tail to add pop and extend life.

Laminate Matrix – Directional layering of fiberglass dictates flex pattern and torsional rigidity.

AR50 Sidewall – Cap construction in the tip and tail and sidewall under foot - balancing performance characteristics with lower swing-weight and increased durability.

Comp Series Base – Armada's fastest base.

2.2 Impact Edge – Heat treated, build to avoid excess weight while maintaining durability.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFT is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.

Triple Pivot Elite Toe Piece – With a horizontally oriented spring, it provides the highest energy absorption to reduce the risk of early release. The secure purchase on the boot lug optimizes power transmission and allows for durable, high energy use. The performance to weight ratio of the Triple Pivot toe is truly unmatched in the industry.

Inter Pivot Heel – This industry-leading construction delivers superior holding power for all types of freeskiing. Its design focuses power in the direction of the boot sole, increasing elasticity. The overall design creates optimum power transmission.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

98-104 mm 360° Custom Shell – Heat moldable shell will accommodate a wide range of foot shapes and widths.

Flex: 120 – Stiff flex suitable for advanced to expert level skiers.

My Custom Fit 3D Race Liner – Built with 80% thermomoldable foam.

Bi-Material PU Shell – A bi-injected shell made from Polyurethane, a material with consistent density enabling effortless progress on-snow, provides well adapted stiffness in a, durable, dynamic and abrasion resistant piece.

Bi-Material PU Cuff – A reinforced rear, lateral insert allows the use of a softer front cuff for improved leg wrapping and progressive flex. This, durable, dynamic and abrasion resistant piece is made of Polyurethane, a material with consistent density that enables effortless progress on-snow.

TwinFrame Technology – Salomon dials in just the right amount of rigidity where it's needed for performance and leaves the shell softer in other areas to enhance comfort and ease of entry.

Adjustable Cuff Angle

2 Backbone Screws

4 mm Integrated Lifter

4 Micro Alu Buckles – To micro adjust the length of the buckles for a precise and personalized closure, just turn the lever. Alu buckles are more resistant and have a rich finish, accepted by all athletes because of their confident feel.

45 mm Velcro Power Strap

ISO 5355 Bi-Material Alpine Sole

24 mm Oversized Pivot – Better control during edging.