Boat Surface Length – 20"

Water Surface Length – 23"

Height – 16.5"

Depth – 12.5"

Concave Design – Every Wakesurf Shaper model has a concave thru the center with a greater, more defined leading edge. The result -- more effective job of diverting a column of water creating less drag on the boat with improved fuel efficiency than last year's model. Designed for the surfer that wants the biggest inboard swell.

Performance Guarantee – If you are not 100% satisfied that this is the best aftermarket Surf Shaper, call 1.888.RONIXCO.

Wakesurf Shaper Placement – The adhesive fastener strips that attach to the boat are intentionally 6" longer than the Wakesurf shaper. This allows for further adjustment towards the bow or the stern of the boat greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper, and deeper -- closer towards the bow and the wake gets a longer sweet spot -- who says you can't tandem surf?

Shim Options – The shim is a simple attachment between the Wakesurf Shaper and a boat's hull. Every hull shape is different -- some are mostly flat and don't require a shim. Others have a step hull and require a 1" shim -- other boats have a more pronounced step and need a 2" shim, while in some cases you might need both shims to make a 3" gap between the hull and your Wakesurf Shaper. For installation, Ronix recommends that the Wakesurf Shaper is 80% submerged when the boat is properly weighted and as close to the stern as your hull will allow.