Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 3 (1 Soft - 5 Stiff)

True Twin – Freestyle specific: Identical tip/tail lengths, symmetrical core profiling, flex and a centered binding stance.

EQ Rad Sidecut – Equalizer straight lines and Radial lines blended together for the perfect balance of agility and fun.

Aspen Core – Full length Aspen wood core with high-density strips of birchwood in the binding area for improved insert retention.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Biaxial Low Density Fiberglass – Low-density fibers allow for lighter boards that keep their playful forgiving flex forever.

Royal Rubber Pads – Soft Royal Rubber blocks inserted into the high-pressure zones of ABS Sidewalls dampen vibration and mellows the big impacts.

Extruded EG – A harder compound than EXT, Salomon EXT EG takes the easy maintenance of a non-sintered base and adds Electra for increased gliding characteristics.

Standard Stone Finish

Bite Free Edge Bevel – Fully detuned tip and tail edges for a hang-up free ride.

Natural Wax

2 x 4 Insert Pattern

Response – 3 - 6 (Soft - Medium)

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Single Component 18% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a soft‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

Toe Hooks 2.0 – Located on the front of each boot, toe hooks keep the toes securely fastened in the Step On binding.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Step On® Binding System – Step On® boot-to-binding system uses two points of connection by the toe utilizing Toe Hooks 2.0 that feature a spring hinge that flexes to maintain closure and provide an easy entrance and exit and one connection point by the heel for increased boot and binding response.

Medium Flex: 4-7 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

1:1 Medium Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

Youth Imprint™ Liner – This liner has an integrated liner lacing and inner lace lock, is heat-modable, has fit panels, and a level 1 molded EVA footbed.

BOA® System – A highly dependable lacing system that can be adjusted at a moment's notice anytime, anywhere. The simple twist of the knob at the top of the boot strategically tightens in just the right places.

TX3 Lacing – The best of both worlds. TX3 is a flexible and low-friction textile lace used in high-power boots to provide a soft, modern design aesthetic with lasting durability and strength.

Step On™ Outsole

Compatibility – Must Be Used with Burton Step On™ Bindings