MEMBERSHIP
The Cardiff Goat Pro Carbon Splitboard doesn't pull punches, spit hairs, or make do with compromises - this is the ultimate splitboard for the discerning backcountry rider who is serious about accessing the best lines anywhere. The Goat Pro Carbon Split uses Cardiff's top end TITANcore of Poplar and Paulownia woods, with a vertically laminated Titanal in between for a tremendous balance of lightness and stability and finishes up with both unidirectional and Triax carbon laminates in the layup. For power, precision, and lightweight maneuverability in the backcountry, the Goat Pro Carbon Splitboard cannot be beat.
HALFcamber60 – The Cardiff HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber60 means 60% of the running surface is cambered.
PROflex (1 Soft - 10 Stiff) – 150cm: 5 // 154cm: 6 // 158cm: 7 // 162cm: 8 // 166cm: 9
RADIcALSIDECUT™ – Blend of Radial and Progressive sidecuts are used on all CARDIFF boards to give each board a unique character.
PERFECTpivot™ 3.0 – Perfect Pivot matches sidecut to rocker profile for each board to allow maximum performance
TITANcore™ PP – Cardiff Pro Carbon series cores feature poplar-paulownia construction with vertical layers of Titanal in-between. This adds dampening to the precise and responsive carbon.
FULLplank™ – Cardiff splitboard cores run tip to tail with special reinforce-ments in the binding and touring hardware locations.
CARBONfiber100™ – A blend of uni-directional and triaxial carbon fiber above and below the core for a super light responsive build.
SLIDEwall™ – UHMWPE sidewalls for super smooth glide - featured on the Pro Carbon Series decks.
RACEbase™ G – Black graphite infused sintered base for maximized glide and easy repair.
SHRredges™ 2.0 – Sharpened and beveled 2.0mm Hardened Rockwell 48c steel edges for maximum durability and precise control
ENDUROcap – On both Enduro and Pro Carbon splitboards, Cardiff use a scratch resistant dimpled topsheet for maximum performance and protection
Art by Kyson Dana
BIloba™ SP – All CARDIFF splitboards feature a chamfered inner edge of the split ski at both the tip and tail to allow for hood free touring and damage free connection
SPLITtech Optimized – All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.
Weight – 150 = 2530 grams, 154 = 2700 grams, 158 = 2840 grams, 162 = 2970 grams, 166 = 3080 grams
Size (cm) | 150 | 154 | 156 | 158 | 162 | 166 |
---|---|---|---|---|---|---|
Effective Edge (mm) | 1150 | 1170 | 1190 | 1220 | 1260 | |
Tip Width (mm) | 286.3 | 291.5 | 296.3 | 300.6 | 306 | |
Waist Width (mm) | 254 | 258 | 262 | 265 | 270 | |
Tail Width (mm) | 276.4 | 280.9 | 285.6 | 289.9 | 295 | |
Sidecut Radius (m) | 10.6 | 10.8 | 10.5 | 11 | 11.5 | |
Stance Setback (mm) | 15 | 15 | 17 | 17 | 17 | |
Width | Regular | Mid-Wide | Mid-Wide | Mid-Wide | Wide |
When it comes to splitboarding, the weak link is usually your bindings. That all ends with the Union Charger Pro Splitboard Bindings. Engineered with an innovative dual lock system similar to the toepiece found on tech ski bindings, this pinless design allows for faster, easier transitions from the skin track to the downhill. The Charger Pro is upgraded with lighter Forged Carbon heelcups and stiffer EXP4 Duraflex ST highbacks for advanced riders seeking the best in both uphill and downhill performance.
Charger Pinless Dual Lock System – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Ride Mode – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Flex Rating – 8/10
SP3 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.
Forged Carbon Heelcup – Lightweight, responsive, and made in Italy, Forged Carbon heelcups are 45% lighter than standard Extruded Aluminum heelcups and still just as bombproof. Backed by Union’s lifetime warranty guarantee.
Exoframe 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.
TS 4.0 Toe Strap with Pin – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point.
Tool-Less Adjustability
Magnesium S1 with Aluminum Base
Grade 8.8 Steel Hardware
EXP4 Duraflex ST – Designed for longer tours and bigger backcountry lines. The EXP4 highback features 15% more fiberglass than the standard EXP3. This stiffer asymmetrical highback shape offers more support on long traverses and quicker edge to edge power for the ride down.
Fits Standard Splitboard (Voile) Insert Pattern
In the Box – Mounting hardware, Charger split disk w/ magnesium adapter plates, quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.
Non-Stick EVA Disk Cover
Integrated Climbing Bar
If you're looking for the best skins in the business, there's one name that stands out from the pack. That's why we partnered with Pomoca to produce the evo x Pomoca Pro Glide Splitboard Skins. Engineered for versatility across the full range of backcountry conditions, these skins combine Pomoca's super grippy mohair / nylon Climb 2.0 plush with their premium Glide treatment for optimal skin track performance. From mid-Winter pow missions to the Spring corn harvest, the evo x Pomoca Pro Glide Splitboard Skins are ready to rumble.
70% Mohair / 30% Nylon
Ever Dry 3.0 DWR – PFC-Free
Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.
Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.
Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.
Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.
Includes Pomoca Skin Trim Tool and Storage Bag
Trim to Fit Any Splitboard
This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.
Size | 145 mm x (M) 158-168 cm | 145 mm x (S) 149-159 cm |
---|---|---|
Width (mm) | 145 | 145 |
Length (cm) | 158 - 168 | 149 - 159 |